replacing tl-wr1043nd v1 with v2 question

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
ScottAdams
Posts: 12
Joined: Mon Jan 23, 2012 10:36 am
Location: Wisconsin
Contact:
Contact ScottAdams

replacing tl-wr1043nd v1 with v2 question

Post by ScottAdams »

My tl-wr1043nd v1 is burnt out. I am getting a tl-wr1043nd v2.

I was running 1.6.1 on the v1 and have downloaded 1.6.2 for the v2. Can I reuse my settings file ok? Any thing I need to be aware of?

Thanks!
Say Yoho - Everything spins around and suddenly I'm elsewhere...
M. Scott Adams (Not Dilbert, Adventure!)
http://www.msadams.com
Top
ScottAdams
Posts: 12
Joined: Mon Jan 23, 2012 10:36 am
Location: Wisconsin
Contact:
Contact ScottAdams

Re: replacing tl-wr1043nd v1 with v2 question

Post by ScottAdams »

Ok tried and it and didn't work. Couldn't see the router GUI anymore but it came up running with no service.

Happily I could use the reset button to get back to the default set and then rebuilt it by hand.
Say Yoho - Everything spins around and suddenly I'm elsewhere...
M. Scott Adams (Not Dilbert, Adventure!)
http://www.msadams.com
Top
Post Reply

Return to “General Discussion”