gargoyle-ispy 2015-March-27 05:44.torrent

[ispyisail]

USE AT YOUR OWN RISK

gargoyle-ispy 2015-March-27 05:44.torrent
http://goo.gl/E2kEVI

Mirror
http://goo.gl/LWBTxS

supported routers
http://goo.gl/L7Ol68

bump openwrt barrier breaker svn version to latest, 44874

use run_haserl script to pass necessary arguments to haserl when called by uhttpd, fixes problems with upgrade interface

fix openvpn firewall up script, variable changed in bb from config.enable to config.enabled

switch openvpn diagnostic test to tell whether we are connected from pinging google.com to 8.8.8.8 to eliminate need for working DNS

[ispyisail]

Lots of downloads, no bad comments so far?

[gendo]

till now all seems good

[Lantis]

Was running my own version of this build but I didn't bump the openwrt revision. Seems stable to me.
Switch to uhttpd seems to occupy less RAM

[marrco]

I just succesfully updated my tp-link wr 841nd v9 from 19.03.2015 version to this build, maintaining settings.

that's how i did.
.) enabled access via ssh
.) used kitty/putty and connected to the router
.) cd /tmp
.) wget or upload new gargoyle firmware (for me gargoyle_1.7.x-ar71xx-generic-tl-wr841n-v9-squashfs-sysupgrade.bin)
.) sysupgrade -v firmwarename.bin

that's it, after a reboot the router restarted with the upgraded version. Now you can disable ssh access again. In my case all settings were maintained. I couldn't upgrade via web interface because in that build it was not working

hth
marco

[tapper]

Have downloaded but cant test yet! I don't have time yet will let you no how it gos wen i have time. Thanks for the build.

[Eilhan]

Upgraded my TP-Link WR1043ND (v1.1), and it's been performing well now for a few hours. Will keep testing it.

[wallacefung]

I can't update TP-Link WR1043ND v1.4 at the first attempt.
It rebooted automatically but it still kept the old firmware.
So I realized that may be caused by lack of memory.
I stopped the OpenVPN server and drop the cache by command
"echo 3 > /proc/sys/vm/drop_caches".
Then I tried flash it again and success.

[c-st]

I'm using it on a TL-WA860RE and everything seems to run great - except for when I update I cannot use sysupgrade. I have to use "mtd -r write ..." because it says 'Sysupgrade is not yet supported on unknown.' What does this tell me?

[lceron80]

updated my wndr3700v2, wndr3700v4, and wndr3800 with this update. all of the routers had gargoyle running but could not sys upgrade any of them. had to failsafe and tftp all 3 routers. routers are working great so far after two hours after upgrading. one thing i noticed with this upgrade is that the wndr3700v4 shows the internet led on even though it is not connected to the internet. the wndr3800 doesn't show any on lan led unless connected to the internet. maybe this is normal and haven't noticed before. please let me know if you need any help in troubleshooting this. thanks for the upgrade...