Version 1.7.0 - Barrier Breaker

papaskitch · Post by **papaskitch** » Thu Feb 19, 2015 10:15 pm

omiez wrote:
justAguy wrote:Just picked up an Archer C7 V2, 1.7.0 only shows the 2.4 wifi.
According to the Wiki, BB supports both frequencies on the V2.
Sysupgraded to BB and both radios show up and are usable.
???

Can you explain this better please?

Are you seeing 2.4 and 5 Ghz ? How did you manage that?

I believe he's flashed OpenWRT BB which does support both radios (although not the AC speeds). I've done the same on my Archer C7 which does give me access to both radios.

vladtheodor · Post by **vladtheodor** » Fri Feb 20, 2015 5:51 am

Hy !

Boost please Gargoyle to show double range of wi-fi signal, no matter how traffic speed is, just show. Can you do this or exists allready a hack for this ? I'm running on channel 13 at 24dbm. At the farthest range point i have good speed but showing poor range and somethimes get signal lost or i can't connect although "the juice" is out there...

redix · Post by **redix** » Fri Feb 20, 2015 8:30 pm

http://downloads.openwrt.org/barrier_br ... actory.bin

http://downloads.openwrt.org/barrier_br ... actory.bin

i thought gargoyle firmware is based on openwrt, but how come we dont have firmwares for mynet?

Post by **tapper** » Sat Feb 21, 2015 2:22 am

redix wrote:http://downloads.openwrt.org/barrier_br ... actory.bin

http://downloads.openwrt.org/barrier_br ... actory.bin

i thought gargoyle firmware is based on openwrt, but how come we dont have firmwares for mynet?

We do but they are not up to date still on 1.62. Put this link in to google translate:
http://eko.one.pl/?p=openwrt-gargoylepl

Post by **ispyisail** » Sat Feb 21, 2015 8:33 am

update

http://www.gargoyle-router.com/phpbb/vi ... 495#p27495

Post by **ispyisail** » Sun Feb 22, 2015 5:26 pm

update

http://www.gargoyle-router.com/phpbb/vi ... =14&t=6779

vladtheodor · Post by **vladtheodor** » Mon Feb 23, 2015 2:18 pm

Hey Guys !!!

Is this real BB ?
I can't downgrade to BB, i can only upgrade to CC (preserving settings).
I think this is based on Chaos Chalmer...

erez669 · Post by **erez669** » Mon Feb 23, 2015 3:50 pm

after 24 hours using this firmware the wifi stop working, so i rebooted my unit everyday to workaround this.
tl-wr1043nd v1 tp-link

vladtheodor · Post by **vladtheodor** » Tue Feb 24, 2015 2:24 pm

Here hangs too. Possible Winamp interference then stops wan and wifi.

Krog · Post by **Krog** » Wed Feb 25, 2015 8:42 am

hi
i read that the tl-wa701nd v2 is now supported in 44441
ispy i beg you add this to you list

Gargoyle Forum

Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker

Re: Version 1.7.0 - Barrier Breaker