Version 1.7.0 - Barrier Breaker

The latest news about Gargoyle

Moderator: Moderators

nworbnhoj
Posts: 914
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: Version 1.7.0 - Barrier Breaker

Postby nworbnhoj » Sun Jan 18, 2015 11:40 pm

VPN is known outstanding issue with 1.7.0
ispyisail wrote:3 major bugs that i'm aware of?

-TOR (install)
-OpenVPN (?)
-QOS (holding settings)


http://www.gargoyle-router.com/phpbb/viewtopic.php?f=3&t=6557&start=90#p26895
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

morgo
Posts: 1
Joined: Mon Jan 19, 2015 7:26 am

Re: Version 1.7.0 - Barrier Breaker

Postby morgo » Mon Jan 19, 2015 7:55 am

I installed 1.70 on onNetgear wndr3800 on the 6th Jan.
There is a bug? when downloading the modem reboots. Not always I assume it depends on how busy is the cable and how fast the server.
I have a cable connection supposed to be 30Mbits max. The computer is directly connected to the the ethernet port not wifi. The wndr3800 has reset about 4 times with normal use in the last 13 days and resets almost always if i try to measure the download speed. I am not an intensive user they are away on holiday .
http://www.ozspeedtest.com/bandwidth-te ... ed-test/1/
https://www.mybroadband.communications. ... dtest.aspx
Status says 123Mb free.
Is this a known problem?

RomanHK
Posts: 471
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Version 1.7.0 - Barrier Breaker

Postby RomanHK » Mon Jan 19, 2015 12:11 pm

phgerin wrote:Download speed reported via UPNP is still broken after a few hours (maybe after 4GB transfert).


Hello,
I tested:
TL-WR1043ND V1, yes, transfers are stoped >4GB (WAN cca. total: 7.021GB, Download 4.825GB, Upload: 2.197GB) :(
TL-WR1043ND V2, no, transfer continues (WAN cca. total: 20.825GB, Download 14.293GB, Upload: 6.432GB) ;)
In the past I tested package of mini-snmpd_1.2b-8 and it was the same.

RomanHK
Turris Omnia with Gargoyle 1.12.0
Linksys WRT3200ACM with Gargoyle 1.12.0
TL-WR1043ND v2 with Gargoyle 1.10.0

phgerin
Posts: 104
Joined: Sun Dec 21, 2014 2:03 pm

Re: Version 1.7.0 - Barrier Breaker

Postby phgerin » Mon Jan 19, 2015 12:44 pm

RomanHK wrote:
phgerin wrote:Download speed reported via UPNP is still broken after a few hours (maybe after 4GB transfert).


Hello,
I tested:
TL-WR1043ND V1, yes, transfers are stoped >4GB (WAN cca. total: 7.021GB, Download 4.825GB, Upload: 2.197GB) :(
TL-WR1043ND V2, no, transfer continues (WAN cca. total: 20.825GB, Download 14.293GB, Upload: 6.432GB) ;)
In the past I tested package of mini-snmpd_1.2b-8 and it was the same.

RomanHK


Thanks,

Transferts are not stopped, its only the download speed reported via UPNP that stops when more than 4Gb are downloaded.
Its still broken with the current build.

User avatar
schorsch
Posts: 9
Joined: Thu Feb 13, 2014 4:33 pm

Re: Version 1.7.0 - Barrier Breaker

Postby schorsch » Mon Jan 26, 2015 9:37 am

Many thanks!

I've upgraded my two "TP-Link TL-WA901N/ND v2" (used as pure clients) today from 1.62 to 1.70 and everything works fine :)

My installed extensions/themes:
- Ping Watchdog
- Dark One

Code: Select all

------------------------------------------------------------------
|            _____                             _                 |
|           |  __ \                           | |                |
|           | |  \/ __ _ _ __ __ _  ___  _   _| | ___            |
|           | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \           |
|           | |_\ \ (_| | | | (_| | (_) | |_| | |  __/           |
|            \____/\__,_|_|  \__, |\___/ \__, |_|\___|           |
|                             __/ |       __/ |                  |
|                            |___/       |___/                   |
|                                                                |
|----------------------------------------------------------------|
| Gargoyle version 1.7.0    | OpenWrt Barrier Breaker branch     |
| Gargoyle revision f739e1e | OpenWrt revision r43694            |
| Built January 04, 2015    | Target  ar71xx/default             |
------------------------------------------------------------------
root@WLC06:/tmp# date && df -h
Mon Jan 26 14:29:15 CET 2015
Filesystem                Size      Used Available Use% Mounted on
rootfs                  320.0K    268.0K     52.0K  84% /
/dev/root                 2.5M      2.5M         0 100% /rom
tmpfs                    14.1M    420.0K     13.7M   3% /tmp
/dev/mtdblock3          320.0K    268.0K     52.0K  84% /overlay
overlayfs:/overlay      320.0K    268.0K     52.0K  84% /
tmpfs                   512.0K         0    512.0K   0% /dev

snake218
Posts: 15
Joined: Wed Jan 28, 2015 6:59 pm

Re: Version 1.7.0 - Barrier Breaker

Postby snake218 » Wed Jan 28, 2015 7:04 pm

Hi, im using 1.7.0 in router TP Link - WR841nd v9 , im having a bug, in Upload QoS settings, can't edit, delete or activate/deactive UP QoS settings, it doesn't save settings or get stuck at "please wait..."

I edit Upload QoS at first install, maybe problem is by mistake i set a class maximun BW (512) higher than Total upload bandwidth (320), now i can't edit or delete class data or total upload value.

pbix
Developer
Posts: 1366
Joined: Fri Aug 21, 2009 5:09 pm

Re: Version 1.7.0 - Barrier Breaker

Postby pbix » Wed Jan 28, 2015 9:31 pm

The TP Link - WR841nd v9 has only 4MB of flash. Expect problems with Gargoyle on 4MB flash routers. Gargoyle users should make sure they have routers with at least 8MB of flash to avoid them.
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM

snake218
Posts: 15
Joined: Wed Jan 28, 2015 6:59 pm

Re: Version 1.7.0 - Barrier Breaker

Postby snake218 » Fri Jan 30, 2015 7:04 pm

Can i reinstall 1.7.0 same way i upgraded from 1.6 branch? Just reflash same 1.7.0 sysupgrade bin? I believe my config file is corrupt (see my previous post too) and when try to reset to factory settings within gargoyle menu don't work (stuck at waiting)

I have a tp 740ND V4 too (4mb) and latest 1.6 brach was working fine, maybe troubles are due to 1.7.0?

gbdisi
Posts: 4
Joined: Thu Mar 13, 2014 7:38 pm

Re: Version 1.7.0 - Barrier Breaker

Postby gbdisi » Fri Jan 30, 2015 7:27 pm

Weird, i work with Gargoyle with at least 10 routers most of them wr1043nd v1 or v2, the main router is a wr4300nd v1, those are used in my work, for personal use i have two routers an wr740n and a wr741nd, i use those two primary for a personal web and database server with advanced firewall rules beside qos and restrictions rules, i'm glad to say that i did the upgrade from 1.6.2 to 1.7.0 preserving the configuration and without any problems at all, the wifi signal is more stable, fast and with a little more range.

But yes there is one issue, before when someone reaches the quota the router send them to a login page, indicating their current quota, with the current versión, there is a no response from every site i visit after the quota is exceded. this is the only issue i have found so far.

Greetings everyone and thanks for your great work.

User avatar
feardc
Posts: 8
Joined: Mon Nov 11, 2013 4:17 pm
Location: Sweden
Contact:

Re: Version 1.7.0 - Barrier Breaker

Postby feardc » Sat Jan 31, 2015 1:37 pm

snake218 wrote:Can i reinstall 1.7.0 same way i upgraded from 1.6 branch? Just reflash same 1.7.0 sysupgrade bin? I believe my config file is corrupt (see my previous post too) and when try to reset to factory settings within gargoyle menu don't work (stuck at waiting)

I have a tp 740ND V4 too (4mb) and latest 1.6 brach was working fine, maybe troubles are due to 1.7.0?

It's possible that 1.7 got little larger, pbix already told you what the problem is, there is not much you can do except getting another router with atleast 8 MB flash.
Gargoyle 1.6.2 @ TL-WR1043ND v1.11 + 4GB USB


Return to “News”

Who is online

Users browsing this forum: No registered users and 1 guest