With the TL-WDR3600 (HW V1.5) and Gargoyle Version 1.6.2 the router hangs sometimes after a reboot command and a power cycle is required to get it back to life.
It is a known problem with openwrt AA https://dev.openwrt.org/ticket/17839
Pach in comment:58 seems to work.
Any chance of adapting gargoyle with that patch ?
Thx.
Reboot hanging TL-WDR3600 (HW V1.5)
Moderator: Moderators
Re: Reboot hanging TL-WDR3600 (HW V1.5)
I hope for the patch too eventhough I don't have this issue since my TP-Link TL-WDR3600 v1.5 using older RAM chip by referring this:
Devices having reboot issues is equipped with Zentel A3R12E40CBF ram chip. Devices without reboot issues has SKhynix H5PS5162GFR ram chip.
Devices without reboot issues has Winbond W9751G6KB-25 ram chip.
It seems SKhynix and Winbond were for older production lots (serial # starting with 13B, 13C, 2141)
Zentel was used for serial # starting with 2143 and 2145
Mine starting with S/N # 2141. Not sure which RAM chip type 'coz I don't open the box yet.
Devices having reboot issues is equipped with Zentel A3R12E40CBF ram chip. Devices without reboot issues has SKhynix H5PS5162GFR ram chip.
Devices without reboot issues has Winbond W9751G6KB-25 ram chip.
It seems SKhynix and Winbond were for older production lots (serial # starting with 13B, 13C, 2141)
Zentel was used for serial # starting with 2143 and 2145
Mine starting with S/N # 2141. Not sure which RAM chip type 'coz I don't open the box yet.
Re: Reboot hanging TL-WDR3600 (HW V1.5)
Now using beta firmware from Barrier Breaker Progress post compiled by ispyisail and reboot seems to work well.
http://www.mediafire.com/download/osqde ... dr3600.zip
http://www.mediafire.com/download/osqde ... dr3600.zip