Cant Enter Fail Safe

[DILLON1293561]

im kind of new to All this so call me a noob if u need to. i'm over it. but i put my TL-WR1043ND v2 into bridge mode and now can not enter the 192.168.1.1 site to change it and can not reset it back is there anyways this can be fixed. every time i enter fail safe modem using command prompt it tells me it can not open connection on port 23. please help if you can it would be greatly appreciated.

[tapper]

Hi wen in fail safe try plugging the Ethernet cable in to the wan port instead of the lan.

[pbix]

If you cannot establish a telnet connection you are not in failsafe mode.

It can be a bit tricky to get into failsafe mode and to get the hang of it you need to practice a little.

Also post the exact error message you are getting. Could be a problem on your PC.

[vastonsmith]

Como eu falei, ele está com o gargoyle 1.4.2.Ele está funcionando, consigo configura-lo e tudo, mas no momento que desligo ele o mesmo perde as configurações. E também não consigo atualiza-lo, da como atualizado, mas fica na mesma versão.

Alienware area51 threadripper, Gamesmagzine
Alienware aurora 2019, Gamesmagzine
Alienware 17in laptop, Gamesmagzine

[nworbnhoj]

Como eu falei, ele está com o gargoyle 1.4.2.Ele está funcionando, consigo configura-lo e tudo, mas no momento que desligo ele o mesmo perde as configurações. E também não consigo atualiza-lo, da como atualizado, mas fica na mesma versão.

As I said, he's the 1.4.2.Ele gargoyle is working, you can configure it and all, but when I turn off it it loses the settings. And I can not update it, as of date, but it is the same version

Google translate is struggling nearly as much as I am with the Spanish. Can you try to ask in English?