1043nd and 130mbps another problem

[screamer]

Hi all,

today i tried first time Gargoyle firmware, currently have only one problem with it.
FW: gargoyle_1.6.2-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin

Wireless-N working at 130mbs only. on stock firmware i had 300 this morning.

my current config:

Code: Select all

config wifi-device 'radio0'
        option type 'mac80211'
        option hwmode '11ng'
        option macaddr 'hidden'
        list ht_capab 'SHORT-GI-40'
        list ht_capab 'DSSS_CCK-40'
        option txpower '20'
        option noscan '1'
        option htmode 'HT40-'
        option channel '9'

config wifi-iface 'ap_g'
        option device 'radio0'
        option mode 'ap'
        option network 'lan'
        option disassoc_low_ack '0'
        option ssid 'zone'
        option encryption 'psk2'
        option key 'hidden'

noscan is not removed when i change channels in GUY.
I do have now two channels 9+13, but connection is still130mbps.
i do have tens of another AP's here, but no one of them using this channels.

my wifi nic is Intel centrion n 2200

thank's for help

[tapper]

Hi were are you getting that reading from? readings like that are not always rite. try copying a file across the network to see how fast it really is.

[screamer]

Hi were are you getting that reading from? readings like that are not always rite. try copying a file across the network to see how fast it really is.

Hi,

fie copy is also slow than normal.
i get 7MB/s
with tp-link FW i had 10-11MB/s

with 1gb file

[tapper]

I just ran some tests and the top speed i can get over WiFi is 150 mbps. most of the time it hovers at 135 mbps tho dont no what's up.