Bricked buffalo wzr-hp-g450h ??

[Woodski]

I had dd-wrt on it that crashed about once a month

From telnet I did this

cd /tmp
wget http://www.gargoyle-router.com/download ... pgrade.bin
mtd -e linux -r write gargoyle_1.6.1-ar71xx-generic-wzr-hp-g450h-squashfs-sysupgrade.bin linux

After the reboot i could open 192.168.1.1 in my webbrowser
I choose a password and waited for the reboot

I have a server with 2 networkcards doing the routing so the buffalo wzr-hp-g450h should be just an accesspoint

Now it went wrong
I choose wireless bridge/repeater and disabled DHCP
SSID to join I left "gargoyle" and I changed the broadcasting SSID
Assigned the WAN port to LAN and did a reboot
After that it seems dead

I can't talk to 192.168.1.1 anymore, dead
Tried a reset but not sure how
(power unit, wait for diag led off, hold reset 10 seconds, release reset)

[ericwong]

Manually set IP address to your computer and then try to access Gargoyle again.

Or do a failsafe reset.
Search for Openwrt failsafe.