Version 1.5.10

The latest news about Gargoyle

Moderator: Moderators

alencarazevedo
Posts: 23
Joined: Thu Sep 15, 2011 5:47 am

Re: Version 1.5.10

Postby alencarazevedo » Tue Jun 18, 2013 12:13 pm

I scheduled my router to reset everyday at 3AM to prevent wireless dropping issues. It reduced the frequency but some minutes ago it occured again. But there's no anything related in logread or dmesg. Below the last entries on logread before the wireless have dropped:

Code: Select all

Jun 18 12:00:22 Gargoyle daemon.info hostapd: wlan0: STA 00:22:fa:44:20:96 WPA: group key handshake completed (RSN)
Jun 18 12:05:18 Gargoyle daemon.info dnsmasq-dhcp[2265]: DHCPDISCOVER(br-lan) 00:e0:91:df:55:ed
Jun 18 12:05:18 Gargoyle daemon.info dnsmasq-dhcp[2265]: DHCPOFFER(br-lan) 10.0.0.215 00:e0:91:df:55:ed
Jun 18 12:05:19 Gargoyle daemon.info dnsmasq-dhcp[2265]: DHCPREQUEST(br-lan) 10.0.0.215 00:e0:91:df:55:ed
Jun 18 12:05:19 Gargoyle daemon.info dnsmasq-dhcp[2265]: DHCPACK(br-lan) 10.0.0.215 00:e0:91:df:55:ed
Jun 18 12:10:22 Gargoyle daemon.info hostapd: wlan0: STA 00:22:fa:44:20:96 WPA: group key handshake completed (RSN)
Jun 18 12:20:22 Gargoyle daemon.info hostapd: wlan0: STA 00:22:fa:44:20:96 WPA: group key handshake completed (RSN)
Jun 18 12:28:56 Gargoyle daemon.info hostapd: wlan0: STA 00:22:fa:44:20:96 IEEE 802.11: disassociated due to inactivity
Jun 18 12:28:57 Gargoyle daemon.info hostapd: wlan0: STA 00:22:fa:44:20:96 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)

demoralized
Posts: 23
Joined: Mon May 20, 2013 2:16 am

Re: Version 1.5.10

Postby demoralized » Tue Jun 18, 2013 4:17 pm

Same thing is happening to me to. Scheduled reboot doesn't cure the problem, at least not for 1.10 HW.

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Version 1.5.10

Postby DoesItMatter » Tue Jun 18, 2013 7:17 pm

It looks like only TP-Link routers (especially later hardware versions)
are having all the wireless issues / dropouts / freezing

I can't tell if it's only people with TP-Link reporting issues or if there
is some underlying OpenWRT issue with TP-Link routers

I've been running 1.5.10 on my WZR-HP-G300NH V1 router
and I've been running it 24/7, streaming youtube videos

It's configured as a wireless bridge with LAN wired clients (no repeater)

I've streamed about 20GB and I have seen no wireless dropouts,
no wireless slowdowns, router is stable and performs perfectly

It's wirelessly connected to my Asus RT-N16 and getting awesome
Wireless-N rates (typically anywhere from 216 - 270 mbps) reported

Zero issues with 1.5.10 on my WZR-HP-G300NH

Anyone else using 1.5.10 NOT on a TP-Link and having any issues?
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

User avatar
maguvu
Posts: 11
Joined: Wed Oct 24, 2012 1:13 am
Location: Dubai, UAE.

Re: Version 1.5.10

Postby maguvu » Wed Jun 19, 2013 1:28 am

Zero issues on both routers.
TP-Link TL-WDR4300 Version 1.0,Firmware :Gargoyle Version 1.6.1
TP-Link TL-WR1043ND Version 1.0,Firmware :Gargoyle Version 1.6.1
OS : Linux Ubuntu 14.04 LTS

NGowner
Posts: 46
Joined: Tue Mar 09, 2010 4:12 pm

Re: Version 1.5.10

Postby NGowner » Wed Jun 19, 2013 12:05 pm

Here's another datapoint for you Eric. I updated my three TP Link routers to 1.5.10 a few days ago.

My 1043ND updated no problem. This is my main router. Wireless access is MAC Address limited to only the other two routers in my house.

My 841ND v7 configured as a non-repeating bridge updated no problem.

My 841ND v5 configured as a repeating bridge would not update. It worked as a bridge, but I could not get it to be a repeater. My solution was to roll that one back to 1.5.8 (I never did the .9 update, so I went back to what I knew worked). It works fine as a repeating bridge with 1.5.8.

I do not know if the v7 would have worked as a repeater, I did not try.

[NG]Owner

cosmins
Posts: 3
Joined: Wed Jun 19, 2013 12:04 pm

Re: Version 1.5.10

Postby cosmins » Wed Jun 19, 2013 12:10 pm

I have no issues with wireless dropping on my tp-link 1043nd v 1.10. I'm using wifi scheduler, witch i find very usefull to shutdown wireless at night and when i'm on the work.
Everyting running smooth except openvpn :(
Last edited by cosmins on Wed Jun 19, 2013 2:06 pm, edited 1 time in total.

demoralized
Posts: 23
Joined: Mon May 20, 2013 2:16 am

Re: Version 1.5.10

Postby demoralized » Wed Jun 19, 2013 12:56 pm

cosmins wrote:I have no issues with wireless dropping on my tp-link 1043nd v 1.10. I'm using wifi scheduler, witch i find very usefull to shutdown wireless at night and whwn i'm on the work.
Everyting running smooth except openvpn :(


Good for you. Im currently having UPnP/NAT-PMP disabled. Trying to see if UPnP was the cause of my problems.

demoralized
Posts: 23
Joined: Mon May 20, 2013 2:16 am

Re: Version 1.5.10

Postby demoralized » Thu Jun 20, 2013 1:00 am

When i thought i solved the problem with wireless i had a surprise today. Router kicked all the users including me and i couldn't connect on it. Is was still broadcasting SSID. Hard reset solved the problem. :cry:
Last edited by demoralized on Thu Jun 20, 2013 6:28 am, edited 1 time in total.

cosmins
Posts: 3
Joined: Wed Jun 19, 2013 12:04 pm

Re: Version 1.5.10

Postby cosmins » Thu Jun 20, 2013 6:28 am

You may try change the channel an lower the transmit power. I'm currently using channel 9 and 18 dBm transmit power.

sp_archer
Posts: 8
Joined: Thu Jun 20, 2013 10:44 am

Re: Version 1.5.10

Postby sp_archer » Thu Jun 20, 2013 10:52 am

lceron80 wrote:i have discovered an issue in copying files in samba. the error is no such file or directory. check out my video file below...


http://ubuntuone.com/1NVQECxxIquPcrHyR2GDBL


https://www.google.com.ua/search?q=samba+file+name+restrictions

Your problem is colon (:) in the file name.

http://en.wikipedia.org/wiki/Filename


Return to “News”

Who is online

Users browsing this forum: No registered users and 4 guests