Hello
I apparently don't know what I'm doing, because everytime I chose a channel higher than the lowest channel for the 5GHz transmitter, the signal apparently vanishes - my computer cant see it anymore.
This happens no matter which channel width I use, be it 20 or one of the 40 MHz.
Is there something I don't know about? Is there some standard I'm breaking by picking a channel other than the lowest one?
This happens on both a WNDR3700v1 and a v2 (with 1.5.10)
HELP! ^^
Wireless Channel (5GHz) woes...
Moderator: Moderators
-
- Moderator
- Posts: 250
- Joined: Thu Jan 17, 2013 11:43 pm
Re: Wireless Channel (5GHz) woes...
some of the 5GHz channels are country dependent; others require scanning for competing weather dopler radar & disable the channel.
See http://en.wikipedia.org/wiki/List_of_WLAN_channels
It may be that your router is using US regulatory frequencies & your adapter is using local frequencies.
See http://en.wikipedia.org/wiki/List_of_WLAN_channels
It may be that your router is using US regulatory frequencies & your adapter is using local frequencies.
TP-Link WDR3600 v1.1 running 1.5.10+ L10n-English (Built 20130922 - OpenWrt r38093)
TP-Link WDR4300 running 1.5.10+ i18n-English (Built 20131010 - OpenWrt r38286)
https://github.com/BashfulBladder/gargoyle-plugins/wiki
TP-Link WDR4300 running 1.5.10+ i18n-English (Built 20131010 - OpenWrt r38286)
https://github.com/BashfulBladder/gargoyle-plugins/wiki
Re: Wireless Channel (5GHz) woes...
Aha! Thank you mate.
I settled on 48 which is allowed in Europe.
Any idea why I can't select a channel like 64? It should be allowed here.
I settled on 48 which is allowed in Europe.
Any idea why I can't select a channel like 64? It should be allowed here.
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Wireless Channel (5GHz) woes...
http://www.gargoyle-router.com/phpbb/vi ... =13&t=3231
Read this thread and apply the mod
This works on Gargoyle 1.5.10 (tested it myself)
Once you apply these and reboot the router, you should be able
to choose the channels/frequencies your country allows
Read this thread and apply the mod
This works on Gargoyle 1.5.10 (tested it myself)
Once you apply these and reboot the router, you should be able
to choose the channels/frequencies your country allows
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400