Gargoyle-ispy 2013-May-09.7z

[ispyisail]

USE AT YOUR OWN RISK

Gargoyle-ispy 2013-May-09.7z
http://goo.gl/Hd47W

Done some basic and all is good

see updates here

http://www.gargoyle-router.com/gargoyle

[firstreflex]

Hi,

Attitude_adjustment/12.09 is included in this new firmware ?

Thank

[jorgecorazondeleon]

Router:wr1043nd v 1.8
ISP: fibertel 6 MB/s Dinamics IP
Up and running.
I do not notice changes from the previous version:Gargoyle-ispy 2013-March-31

[rt_rex]

Success on TL-WR741ND V4.2

Upgraded from 1.5.9 no problems so far.
I added the 13 channel fix for europe .

Code: Select all

ssh root@openwrt

cd /tmp/
wget http://luci.subsignal.org/~jow/reghack/reghack.elf
chmod +x reghack.elf
cp /lib/modules/*/ath.ko .
cp /lib/modules/*/cfg80211.ko .
./reghack.elf ath.ko
./reghack.elf cfg80211.ko
mv *.ko /lib/modules/*/
reboot

EDIT:
13 channels working OK
Just added some adjustments for outdoor

Code: Select all

uci set wireless.radio0.distance=20000
uci set wireless.radio0.noscan=0
uci set wireless.radio0.beacon_int=120
uci set wireless.radio0.short_preamble=0
uci set wireless.radio0.iapp_interface=radio0
uci commit
wifi

I would like to leave a naming for the development releases

"Gargoyle X" or
"Gargoyle Dark X"

[erez669]

how to install this? i have gargoyle 1.5.2 now, wifi is instable, LAN is OK.
and can i install directly the openwrt?

[ispyisail]

how to install this? i have gargoyle 1.5.2 now, wifi is instable, LAN is OK.
and can i install directly the openwrt?

x-fta ???

[erez669]

ok i will explain again:
this file Gargoyle-ispy 2013-May-09.7z is not a firmware? and if this firmware, how to install this on the router TP-LINK 1043ND?
i have a lot of wifi issues after installing version 1.5.2 of gargoyle firmware, i decide to upgrade from 1.4.7.
thanks in advanced for help.

[ispyisail]

ok i will explain again:
this file Gargoyle-ispy 2013-May-09.7z is not a firmware? and if this firmware, how to install this on the router TP-LINK 1043ND?
i have a lot of wifi issues after installing version 1.5.2 of gargoyle firmware, i decide to upgrade from 1.4.7.
thanks in advanced for help.

If you done't know how to install these builds you probably shouldn't use them.

having said that..............

unzip using 7zip
find the file for your router
use the gargoyle web interface to install

[erez669]

ok thanks, i don't want to use them, i just want to understand how.
i'm using gargoyle 1.5.2, i want to know when you release a new updated firmware that solve the wifi instability in 1043nd router of tp-link?
all other functions is working fine except the wifi that disconnect a lot of times and connecting without surfing the net.

thanks again for answer.

[ispyisail]

I think you will find the wifi much improved in this build

http://www.gargoyle-router.com/phpbb/vi ... =14&t=4256

Based on your other comments i'm worried that you might brick your router and not be able to recover..................................