Any chance we could get a custom build for the Linksys E2000 / WRT320N? I think it is supported by OpenWRT, but some patches / configuration changes have to be made.
See: http://www.znau.edu.ua/temp/asus-rt-n16 ... README.txt
and https://forum.openwrt.org/viewtopic.php ... 31#p181431
Support for Linksys E2000 / WRT320N
Moderator: Moderators
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Support for Linksys E2000 / WRT320N
You'll have to wait for official support from OpenWRT
There are 1000's of routers out there
It would require too much effort to make compiles/update patches
for individual routers.
Try and compile your own vanilla OpenWRT builds
This takes a while and generates many different files/firmwares
There are 1000's of routers out there
It would require too much effort to make compiles/update patches
for individual routers.
Try and compile your own vanilla OpenWRT builds
This takes a while and generates many different files/firmwares
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Support for Linksys E2000 / WRT320N
Hi there!
Right now you can get the E2000 for $80. 200ft is quite a distance for inside a building not sure if you don't need a second router to work as a bridge repeater to up the range especially for gaming.
--mak12--
Right now you can get the E2000 for $80. 200ft is quite a distance for inside a building not sure if you don't need a second router to work as a bridge repeater to up the range especially for gaming.
--mak12--