Version 1.5.9 - Plugins Interface

[yc3948]

I think it only for old free account otherwise will have many report here.

Do you know when No-IP make this change? And it only affect free hosts(No-IP Free) or affect all hosts? Because my hosts( No-IP Plus) working fine until now. Thanks

Sorry, I've no idea. Plus, I only have a Free Account (created few years ago) and I don't/can't test it with a Plus Account.

[pmerrill]

Thought I would pass this information on about 1.5.9.

I flashed my new TP-Link WDR4300 from stock firmware, so not an upgrade from 1.5.8.

Thus far, the system has been rock solid, it's been up for 5 days, 18 hours, no problems with wireless, no problems with wired connections. I do use:

• OpenDNS
• Firewall restrictions on a schedule
• QoS for VoIP operations

but have not used the USB ports, TOR nor OpenVPN.

The ONLY problem I have thus far, with no solution, is my xBox will not connect wirelessly to the router.

I'm wondering whether some of the problems experienced thus far can be attributed to upgrades between 1.5.8 and 1.5.9? Perhaps a revert to stock followed by a 1.5.9 install may fix some of the problems?

Overall, except for the xBox problem which I suspect is really an OpenWRT problem, Gargoyle 1.5.9 is great!

[pmerrill]

One possible issue I see in my dmesg for 1.5.9 is:
[346121.820000] net_ratelimit: 54 callbacks suppressed
[346121.820000] nf_conntrack: table full, dropping packet.
[346122.010000] nf_conntrack: table full, dropping packet.
[346122.180000] nf_conntrack: table full, dropping packet.
[346122.280000] nf_conntrack: table full, dropping packet.
[346122.290000] nf_conntrack: table full, dropping packet.
[346122.300000] nf_conntrack: table full, dropping packet.
[346122.300000] nf_conntrack: table full, dropping packet.
[346122.310000] nf_conntrack: table full, dropping packet.
[346122.310000] nf_conntrack: table full, dropping packet.
[346122.320000] nf_conntrack: table full, dropping packet.

What's this and are there any setting I can adjust to get rid of it if it's a problem?

[yousaf465]

m0ved.

[pbix]

Folks who feel they are having problems with any version of Gargoyle are well advised to make their own posts in the appropriate forum section.

The news post is not the proper place to report a problem or request help.

[ruslan]

Hello. Using TP-Link 1043WR with Gargoyle v1.5.9
Have a problem then using FTP: after uploading file to ftp from any device (tested on pc and phone), file succesfully uploads to ftp folder (size matches), but afterwards I can't open this file or download it. The only thing that I can do with it - delete.
Using CIFS, I can't open this file too, only delete.
What am I doing wrong?

[lceron80]

Hello. Using TP-Link 1043WR with Gargoyle v1.5.9
Have a problem then using FTP: after uploading file to ftp from any device (tested on pc and phone), file succesfully uploads to ftp folder (size matches), but afterwards I can't open this file or download it. The only thing that I can do with it - delete.
Using CIFS, I can't open this file too, only delete.
What am I doing wrong?

i was having the same issue, seems to be permissions related. check out my post. i had to revert back to 1.5.8 to fix issues. which ftp program are you using? if you are using filezilla you can check file properties and you'll see that you don't have permissions to open or do anything else with the file after you've uploaded through ftp.

my post

http://www.gargoyle-router.com/phpbb/vi ... ons#p16421

[behappy]

Hello. Using TP-Link 1043WR with Gargoyle v1.5.9
Have a problem then using FTP: after uploading file to ftp from any device (tested on pc and phone), file succesfully uploads to ftp folder (size matches), but afterwards I can't open this file or download it. The only thing that I can do with it - delete.
Using CIFS, I can't open this file too, only delete.
What am I doing wrong?

i was having the same issue, seems to be permissions related. check out my post. i had to revert back to 1.5.8 to fix issues. which ftp program are you using? if you are using filezilla you can check file properties and you'll see that you don't have permissions to open or do anything else with the file after you've uploaded through ftp.

my post

http://www.gargoyle-router.com/phpbb/vi ... ons#p16421

Hi guys,

I had probl. w. vsftpd too. Solved by update the opkg from http://ecco.selfip.net/gargoyle-pl/atti ... /packages/

The package http://ecco.selfip.net/gargoyle-pl/atti ... ar71xx.ipk

Some thing wrong in the vsftpd template from 1.5.9 build!

[Cezary]

File permissions in template. I've sent fix to repo: https://github.com/obsy/gargoyle/commit ... c7ab1ea0a3

[r2d2]

Hi i have question,have plans to include transmission package to plugins ?!