G 1.5.8, WNDR3700v2 -- wireless needs frequent reset

[FrequentlyWrong]

Router is WNDR3700v2. Using dual-band. Gargoyle 1.5.8.

Every few days, or after a night of BitTorrent activity, the router stops accepting new connections with wireless clients. To remedy, I reboot or change the wireless channel.

I never had this problem with the original Netgear firmware. It seems unlikely to be a problem with Gargoyle itself -- Is it a known problem with the beta version of OpenWRT?

[pbix]

Sounds like maybe you are running out of connections.

When the router next gets in this state copy and post the status page.

[FrequentlyWrong]

Here's what I see:

Gargoyle Version:1.5.8
Model:NETGEAR WNDR3700v2
Device Configuration:Gateway
Memory Usage:18.7MB / 60.3MB (31%)
Connections:238/4096
CPU Load Averages:0.11 / 0.04 / 0.05 (1/5/15 minutes)

I believe that THIS is the problem:
https://dev.openwrt.org/ticket/11894

Will try to upgrade to 1.5.9.

[FrequentlyWrong]

After the upgrade to G 1.5.9 (from 1.5.8), the router has been connecting authorised wireless clients without a problem for more than 10 days.