Bandwidth Usage

[q2werty]

Hi,
I have a problem with the display bandwidth usage.
My wan address changes every hour.
With the change of address WAN bandwidth consumption shows badly.
At a constant wan address this problem does not exist.
My software Gargoyle (1.5.6 (r33081), by obsy).
What should I do?.

Thanks.

[q2werty]

Had no problems at all?

[ericwong]

Hi,
I have a problem with the display bandwidth usage.
My wan address changes every hour.
With the change of address WAN bandwidth consumption shows badly.
At a constant wan address this problem does not exist.
My software Gargoyle (1.5.6 (r33081), by obsy).
What should I do?.

Thanks.

Manually put a static IP at the WAN so that it can't change?

[q2werty]

I can not manually set.
more http://openrouter.info/forum/viewtopic. ... 272#p20272

[ericwong]

I can not manually set.
more http://openrouter.info/forum/viewtopic. ... 272#p20272

Can't read non-english.
but looks like ROM bug, maybe you should try another ROM or another build?

[q2werty]

I tried the previous and the same problem occurred.
When the wan address changes every hour, badly bandwidth consumption displays.

[ericwong]

I tried the previous and the same problem occurred.
When the wan address changes every hour, badly bandwidth consumption displays.

You could try the 1.4.x build, at least it is labelled "stable" whereas 1.5.x is labelled as "experimental".

I see your router, WNDR3800 is ar71xx based.

So, you can simply download the corresponding ROM directly from
http://www.gargoyle-router.com/download.php

I suggest you try every build you can find down there.
Maybe starting from 1.5.6 ---> 1.5.0
If doesn't work, try 1.4.7 ---> 1.4.0

Some developers here might have better suggestions but I would try this first if I were you..

[q2werty]

In free time I install 1.5.6 from a specified page.
And I have to configure my 3G modem for Internet connection.
The Gargoyle by obsy 3G modem is built.

[ericwong]

In free time I install 1.5.6 from a specified page.
And I have to configure my 3G modem for Internet connection.
The Gargoyle by obsy 3G modem is built.

Learn to install the 3G package manually.
http://wiki.openwrt.org/doc/techref/opkg

You can always do a backup of your 3G configuration and do a restore

Or if you are more savvy, learn to build it from source and you can have all your own configurations included in the build.