Gargoyle doesn't log Web Searches

[razorpl]

Gargoyle Web Searches seems to stop working while "scheduled reboot" option is enabled.
My router is rebooting everyday at 3 a.m.
Without this option, router is logging every web search.
Cau u fix it please?

[petruha]

I confirm this problem, please check and a big fix.

[Eric]

I just tried to reproduce this issue, but couldn't do so. I scheduled a daily reboot, but the searches continued to be logged properly.

Does anyone else have this issue? Also could you share a few more details about your configuration?

[petruha]

Router TP-LINK WR1043nd hw 1.8, gargoyle 1.5.4, pppoe - dynamic ip.
Web Searches stops working whenever you restart, does not necessarily "scheduled reboot".
I have to go to the web and restart the service after each reboot.

[mates]

I have no problem on WNDR 3700v2
loging OK

EDIT: I retested this
and now i had a same problem with web searches
I only restart router after +-30 days and nothing under search is logged
I have 1.5.4 firmware

how you restarting service? could you please give mi some tutorial steps?
thanks

[razorpl]

TP-Link Tl-WR1043ND
Gargoyle: 1.5.4

Web searches doesnot work with manual and scheduled reboot.

Problem with web searches appeared when i've activated scheduled reboot.

[razorpl]

can somebody fix that problem? I cannot see, what people are serching for. This option was working until enabling scheduled reboot. Please help.

[razorpl]

Did someone found a solution to solve this problem?

[DoesItMatter]

Do you still have this issue?

D-Link DIR 601 A1 - Fresh install of 1.5.7

Device Name:Gargoyle
Gargoyle Version:1.5.7
Device Configuration:Wireless Bridge/Repeater
Memory Usage:11.2MB / 28.7MB (39%)
Connections:143/4096
CPU Load Averages:0.43 / 0.17 / 0.06 (1/5/15 minutes)

-------------------

Setup to monitor all web search/history for all hosts
Setup Daily reboot of midnight

It does not seem to be logging anything though.

After doing searching/browsing, I try to download the .csv files
and they are 0-byte files - does this not work when its configured
as Wireless-Bridge mode? I'm not using repeater mode.

Connecting Wirelessly to the main AP, and then have my DIR-601
issuing DHCP addresses over the LAN in a seperate subnet.