Installation wavemon

[kobysport]

Hi all, forgive my bad English.
I open this post, to advise the installation of the package "wavemon" to monitor the signal through Console. and so can adjust much more comfortable and more accurately the router.
if someone has it already installed, please say how.
I installed this package,>

http://foro.seguridadwireless.net/softw ... mikaze)-)/

Download package http://sites.google.com/site/lsdios/fon ... edirects=0

Where it says "meter-wifi, tar, gz" which includes wavemon for OpenWrt. but I guess that is good for gargoyle, since that is specific for Fonera.
greetings and thanks!

Video of wavemon funcion

http://www.youtube.com/watch?v=SLoTRwjA0dA

[kobysport]

anyone know how to install "wavemon" in gargoyle through SSH?

[kobysport]

help me please

[DoesItMatter]

What router do you have?

I was able to install Wavemon with OpenWRT installed

Did these commands:

opkg update
opkg install wavemon
opkg install libcap

These should install and configure on their own

To run:

/usr/bin/wavemon

Should also work in Gargoyle.

I suspect your router has to have at least 4MB flash and 16+MB Ram

This worked on a DIR-601 with 4MB Flash / 32MB Ram

[kobysport]

What router do you have?

I was able to install Wavemon with OpenWRT installed

Did these commands:

opkg update
opkg install wavemon
opkg install libcap

These should install and configure on their own

To run:

/usr/bin/wavemon

Should also work in Gargoyle.

I suspect your router has to have at least 4MB flash and 16+MB Ram

This worked on a DIR-601 with 4MB Flash / 32MB Ram

Hi, thanks for responding again.
I have a router TP-Link TL-WR741ND with 1.5.3 gargoyle

I would love to install that package that I used to guide the router.
A greeting.

[kobysport]

Code: Select all

opkg install wavemon
Installing wavemon (0.7.2-1) to root...
Collected errors:
 * verify_pkg_installable: Only have 28kb available on filesystem /overlay, pkg wavemon needs 33
 * opkg_install_cmd: Cannot install package wavemon.

[DoesItMatter]

Your router does not have enough memory or space available.

The WR741N image is about 3.6MB

The DIR-601 image is about 3.1MB

So my router has space available to install packages.

Your router does not. You would need a router with 8MB flash
in order to install Wavemon if you stick with the TP-Link routers.

[kobysport]

Your router does not have enough memory or space available.

The WR741N image is about 3.6MB

The DIR-601 image is about 3.1MB

So my router has space available to install packages.

Your router does not. You would need a router with 8MB flash
in order to install Wavemon if you stick with the TP-Link routers.

Thanks for your wise answer, then there is no way to install this package on this router.
a greeting.

[kobysport]

ny equivalent package to go with it there?
Thanks a greeting.

[DoesItMatter]

http://downloads.openwrt.org/backfire/1 ... pgrade.bin

You MIGHT be able to get it installed using the OpenWRT 10.03.1 image

Gargoyle adds more space, so you don't have enough flash left with
the Gargoyle firmware.

Plain OpenWRT firmware should allow you to install Wavemon with
the instructions I posted above.