TP-Link wr703N

[juzis28]

Hi, people, i`m happy user of Gargoyle on mine two foneras, recently i bought the cheap wr703N router and i would you ask is here any chance to get Gargoyle running on this model? I haven`t found any info on this forum regarding wr703N.

Here is the openwrt running on it already:
http://wiki.openwrt.org/toh/tp-link/tl-wr703n
perhaps here isn`t that hard to develop images for this device?

I`m ready to participate in testing, have Serial cable already and some experience.

Features
Atheros AR7240 CPU (400Mhz)
Atheros AR9331 Chipset (integrated wireless)
802.11 b/g/n 150Mbps (130Mbps real)
wireless power output 20dBm - 100mW
4 MB flash memory
32 MB RAM
USB 2.0 port
Powered via micro-USB socket

Thanks!

[juzis28]

As the openwrt wiki says, the device is very similar to MR-3020, i used the closest image to this model:

Code: Select all

gargoyle_1.4.7-ar71xx-tl-mr3420-v1-squashfs-factory.bin

Have failed. Got my device bricked - cycle reboot because of too big unsquashed image.

Code: Select all

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.03.20 20:09:26 =~=~=~=~=~=~=~=~=~=~=~=
  ˙

U-Boot 1.1.4 (Sep 26 2011 - 11:13:45)

AP121-2MB (ar9330) U-boot

DRAM:  32 MB
led turning on for 1s...
id read 0x100000ff
flash size 4194304, sector count = 64
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
ag7240_phy_setup 
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
ag7240_phy_setup 
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... Too big uncompressed streamLZMA ERROR 1 - must RESET ˙

U-Boot 1.1.4 (Sep 26 2011 - 11:13:45)

AP121-2MB (ar9330) U-boot

DRAM:  32 MB
led turning on for 1s...
id read 0x100000ff
flash size 4194304, sector count = 64
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
ag7240_phy_setup 
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
ag7240_phy_setup 
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... Too big uncompressed streamLZMA ERROR 1 - must RESET ˙

U-Boot 1.1.4 (Sep 26 2011 - 11:13:45)

AP121-2MB (ar9330) U-boot

DRAM:  32 MB
led turning on for 1s...
id read 0x100000ff
flash size 4194304, sector count = 64
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
ag7240_phy_setup 
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
ag7240_phy_setup 
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... Too big uncompressed streamLZMA ERROR 1 - must RESET  

Sure device is unbricked already and i can`t decide what image to try next

Eric, could you please give some advice?

EDIT: i tried almost all ar71xx images those aren`t bigger than 3.8Mb and i always got same error

Code: Select all

Too big uncompressed streamLZMA ERROR 1 - must RESET  

Seems here we need custom compilation

[juzis28]

post moved http://www.gargoyle-router.com/phpbb/vi ... 331#p27331

Thanks for adding support of wr703n !