Accessing my Mikrotik in BRIDGE mode

If your problem doesn't fall into one of the other categories, report it here.

Moderator: Moderators

Post Reply
karlos
Posts: 6
Joined: Thu Jan 20, 2011 9:45 am

Accessing my Mikrotik in BRIDGE mode

Post by karlos »

Hi

I have my Mikrotik Groove set to 192.168.88.1 (BRIDGE - client to connect to the Internet via WiFi) and Gargoyle router (TL-WR1043ND) set to 192.168.1.1 - home network routing. I have a public IP and port forwarding is set at the Gargoyle. MikroTik setup I can not connect via Gargoyle but only directly.

internet -- mikrotik groove -- Gargoyle router(WR1043ND) -- Client PC


I tried to set Gargoyle these instructions (Accessing your ADSL Modem In Bridge Mode) - but unsuccessfully. (http://www.gargoyle-router.com/wiki/dok ... ridge_mode)


i set in /etc/ppp/ip-up.d/modemaccess.sh

#ROUTER_IP=10.0.0.2
to
ROUTER_IP=192.168.88.2

Any ideas if it is possible to access the mikrotik with them connected through TL-WR1043ND?

Thanks for any ideas ;)
Top
karlos
Posts: 6
Joined: Thu Jan 20, 2011 9:45 am

Re: Accessing my Mikrotik in BRIDGE mode

Post by karlos »

Why doesn´t working the setting for the ADSL modem in bridge mode for Mikrotik in bridge mode? There should be no difference between Mikrotik and ADSL modem in bridge mode :roll:
Top
Post Reply

Return to “Other Issues”