I've posted before about the failure to upgrade to Gargoyle in another thread. I've managed to recover from it, three times, using the help in that thread. Now I'm trying to get Gargoyle sucessfully installed. I have never managed it yet.
I have tried it three times, once with tftp and twice with telnet. I have also tried openwrt, using the instructions here: http://wiki.openwrt.org/toh/buffalo/wzr ... to.openwrt
Nothing seems to work. Here is the boot sequence from the latest failed openwrt load:
Code: Select all
BUFFALO U-BOOT Ver 1.07
AP83--539 (ar9100) U-boot 0.0.12
BUFFALO U-BOOT Ver 1.07
AP83--539 (ar9100) U-boot 0.0.12
64 MB
Memory Test (address line)
Memory Test start(0x00000000) end(0x04000000) size(67108864)
Data line test start:0x00000000 pattern 0x00000001 0x00000003 0x00000007 0x0000
Address line test start:0x00000000 len:0x4000000 pattern 0xAAAAAAAA 0x55555555
Fill test patnum:5
fill Pattern 5555AAAA Writing... Reading...
fill Pattern AAAA5555 Writing... Reading...
fill Pattern 0000FFFF Writing... Reading...
fill Pattern FFFF0000 Writing... Reading...
fill Pattern AAAAAAAA Writing... Reading...
Top of RAM usable for U-Boot at: 84000000
Reserving 275k for U-Boot at: 83fb8000
Reserving 256k for malloc() at: 83f78000
Reserving 44 Bytes for Board Info at: 83f77fd4
Reserving 36 Bytes for Global Data at: 83f77fb0
Reserving 128k for boot params() at: 83f57fb0
Stack Pointer at: 83f57f98
Now running in RAM - U-Boot at: 83fb8000
Dev ID2:2222
Dev ID3:2201
Name: AMD-SPANSION Flash id: 0x1227E, Size: 33554432 bytes.
Flash: 32 MB
In: serial
Out: serial
Err: serial
Memory Test
uboot use 83F57FB0 - 84000000
Memory Test start(80000000) end(83F00000) size(03F00000)
Pattern 00000000 Writing... Reading...
Memory Test OK
### buf_ver=[1.07] U-Boot Ver.=[1.07]
### build_date(env)=[Dec 21 2009 - 10:37:30] build_date(bin)=[Dec 21 2009 - 10:]
ag7100_enet_initialize...
: cfg1 0xf cfg2 0x7114
RTL8366 series driver, reading model-id...
ID:0x5937, REV:0x0
rtl8366rb_phy_setup ethUnit=0
Realtek 8366RB switch ID:0x5937 REV:0x3
Realtek Greeen Ethernet Setup
eth0: 02:aa:bb:cc:dd:1a
eth0 up
: cfg1 0x7 cfg2 0x7114
RTL8366 series driver, reading model-id...
eth1: 02:aa:bb:cc:dd:1a
eth1 up
eth0 02:AA:BB:CC:DD:1A
, eth1 02:AA:BB:CC:DD:1A
Trying eth0
eth0 is duplex
ag7100_check_link: _100BASET
dup 1 speed 100
CFG_PLL_FREQ=5
CFG_HZ=bebc200
cpu pll=1050
eth pll=1032
eth0 clk pll=13000a44
eth0 mii=12
eth0 cfg1=f
eth0 cfg2=7115
eth0 fcfg_0=1f1f00
eth0 fcfg_1=7ff0000
eth0 fcfg_2=fff
eth0 fcfg_3=780008
eth0 fcfg_4=3ffff
eth0 fcfg_5=3ffff
tftp server(receive) go, waiting:4[sec]
Trying eth1
eth1 link down
FAIL
Trying eth0
eth0 is duplex
ag7100_check_link: _100BASET
Load address: 0x81f00000
checksum bad
TftpServer Timeout;
no file was loaded.
## Booting image at be060000 ...
Image Name: MIPS OpenWrt Linux-2.6.32.27
Created: 2011-10-30 16:21:56 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 893932 Bytes = 873 kB
Load Address: 80060000
Entry Point: 80060000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 67108864
Starting kernel ...
Linux version 2.6.32.27 (jow@nd-build-02.linux-appliance.net) (gcc version 4.3.1
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115H
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 61692k/65536k available (2126k kernel code, 3772k reserved, 423k data, )
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is Buffalo WZR-HP-G300NH
Found an RTL8366RB switch
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
yaffs Oct 10 2011 14:02:06 Installing.
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
ar91xx-flash ar91xx-flash: 02000000 at 1e000000
ar91xx-flash: Found 1 x16 devices at 0x0 in 16-bit bank
CFI mfr 0x00000001
CFI id 0x00002201
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
ar91xx-flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
ar91xx-flash ar91xx-flash: using static partition mapping
Creating 7 MTD partitions on "ar91xx-flash":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000060000 : "u-boot-env"
0x000000060000-0x000000160000 : "kernel"
0x000000160000-0x000001fc0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=340000, len=1C80000
0x000000340000-0x000001fc0000 : "rootfs_data"
0x000001fc0000-0x000001fe0000 : "user_property"
0x000001fe0000-0x000002000000 : "art"
0x000000060000-0x000001fc0000 : "firmware"
Atheros AR71xx SPI Controller driver version 0.2.4
Realtek RTL8366S ethernet switch driver version 0.2.2
rtl8366s rtl8366s: using GPIO pins 19 (SDA) and 20 (SCK)
rtl8366s rtl8366s: unknown chip id (0000)
rtl8366s rtl8366s: chip detection failed, err=-19
eth0: Atheros AG71xx at 0xb9000000, irq 4
CPU 0 Unable to handle kernel paging request at virtual address 0000000c, epc =8
Oops[#1]:
Cpu 0
$ 0 : 00000000 0000006e 00000000 00000000
$ 4 : 83819d40 83819d40 00000000 0390e000
$ 8 : 0000000a 00000000 00000400 8030fc5c
$12 : 000000cd 00000004 838e8288 b9000000
$16 : 83819d40 00000000 801d6a7c 83819d40
$20 : 00000200 00000000 802c6280 802c6278
$24 : 00000003 801a3c94
$28 : 83818000 83819d08 00000000 801a7e28
Hi : 00000079
Lo : 037e0000
epc : 80272398 0x80272398
Not tainted
ra : 801a7e28 0x801a7e28
Status: 1000d003 KERNEL EXL IE
Cause : 80800008
BadVA : 0000000c
PrId : 00019374 (MIPS 24Kc)
Modules linked in:
Process swapper (pid: 1, threadinfo=83818000, task=83814000, tls=00000000)
Stack : 000003e8 00020788 00000085 1efac000 0000000a 83819d40 83819d40 801d6a7c
802a4b40 801a7e28 838e8288 b9000000 00000000 83813c00 00000000 00000000
00000200 ffffffff 802cc938 83813ec0 802c6238 80067de4 802c6280 802c6278
83818000 83819d90 00000000 80067a5c 1000d003 ffffffff 83813c00 83813ec0
ffffffff 80067a80 00000000 83813c00 b9000000 00000004 83813c00 83813c00
...
Call Trace:[<801d6a7c>] 0x801d6a7c
[<801a7e28>] 0x801a7e28
[<80067de4>] 0x80067de4
[<80067a5c>] 0x80067a5c
[<80067a80>] 0x80067a80
[<801ab294>] 0x801ab294
[<80173cb0>] 0x80173cb0
[<801ab3d8>] 0x801ab3d8
[<8017438c>] 0x8017438c
[<801ab36c>] 0x801ab36c
[<801aa9e0>] 0x801aa9e0
[<8017441c>] 0x8017441c
[<801aa164>] 0x801aa164
[<801ab78c>] 0x801ab78c
[<802f06f4>] 0x802f06f4
[<801ab78c>] 0x801ab78c
[<801cac48>] 0x801cac48
[<802f06f4>] 0x802f06f4
[<802f071c>] 0x802f071c
[<802f0510>] 0x802f0510
[<8006b6e0>] 0x8006b6e0
[<800abfec>] 0x800abfec
[<802efbf8>] 0x802efbf8
[<802de33c>] 0x802de33c
[<8006d994>] 0x8006d994
[<802de26c>] 0x802de26c
[<8006d984>] 0x8006d984
Code: 8c820000 8c910004 00809821 <12200009> 8c52000c 8e220004 3c058027 24a
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init!Please help!
Statik
