Request:Gargoyle for 901nd

[mehtab]

It is fully supported on openwrt and therefore would like to see it ported to gargoyle.
Here is link:
http://wiki.openwrt.org/toh/tp-link/tl-wa901nd

[mehtab]

I have successfully flashed my 901nd v1 router with 941nd v4 bin and it works perfectly!

[nebbia88]

what?? stock GUI of a wa901nd v1 let you flash gargoyle wr941nd v4 factory.bin firmware?

if so, great!!!

btw, what version of gargoyle?

[mehtab]

No I had openwrt installed first then I ssh the router and used back to firmware commands:

Code: Select all

cd /tmp
wget http://www.gargoyle-router.com/downloads/images/ar71xx/gargoyle_1.5.2-ar71xx-tl-wr941nd-v4-squashfs-factory.bin
mtd -r write /tmp/gargoyle_1.5.2-ar71xx-tl-wr941nd-v4-squashfs-factory.bin firmware

Version of gargoyle is 1.5.2 as you can see from the commands I used above.

[DoesItMatter]

If you have OpenWRT installed - you can upgrade from the LuCi GUI

Just choose the appropriate Gargoyle firmware.

You can flash back/forth between Gargoyle and OpenWRT

[hnl_dk]

If you have OpenWRT installed - you can upgrade from the LuCi GUI

Just choose the appropriate Gargoyle firmware.

You can flash back/forth between Gargoyle and OpenWRT

IIRC he has earlier written that the webinterface was not working on his openwrt installation, that is why he did it through ssh.

[mehtab]

If you have OpenWRT installed - you can upgrade from the LuCi GUI

Just choose the appropriate Gargoyle firmware.

You can flash back/forth between Gargoyle and OpenWRT

IIRC he has earlier written that the webinterface was not working on his openwrt installation, that is why he did it through ssh.

Yup doesn't work though LuCi gui..

[DoesItMatter]

http://wiki.openwrt.org/doc/howto/generic.sysupgrade

You can always try the sysupgrade command via putty.

MTD writes can be risky is why.

I use MTD myself, and am aware of any risks.

Sysupgrade should always work from command line as well.

[mehtab]

I think gargooyle is doing it all wrong since 1.5.1. Very unstable after that release.

[hnl_dk]

I think gargooyle is doing it all wrong since 1.5.1. Very unstable after that release.

I guess that you have not upgraded all that way through 1.5.3, that is very stable and you should be very happy with that version. it should be very stable for all users, even though it is still an experimental version.