Version 1.5.2 & 1.4.5

The latest news about Gargoyle

Moderator: Moderators

Post Reply
Culex
Posts: 28
Joined: Sat Dec 25, 2010 5:38 am

Re: Version 1.5.2 & 1.4.5

Post by Culex »

I installed 1.5.2 without a hitch. However when adding static ip address's sometimes when adding the cpu usage goes to 100% and the router reboots. wrt54gl

UsernameTaken
Posts: 34
Joined: Mon Feb 28, 2011 4:27 pm

Re: Version 1.5.2 & 1.4.5

Post by UsernameTaken »

It happened again. Wifi has slowed down to a crawl again (0.54 Mbit/s down vs 11 after reboot). This is my syslog: http://pastie.org/3144945

Hope it can be of some help.

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: Version 1.5.2 & 1.4.5

Post by hnl_dk »

UsernameTaken wrote:It happened again. Wifi has slowed down to a crawl again (0.54 Mbit/s down vs 11 after reboot). This is my syslog: http://pastie.org/3144945

Hope it can be of some help.
Make a post in troubleshooting and please add your wifi settings (and the router that it is installed on).
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

kamiller42
Posts: 7
Joined: Sat Nov 26, 2011 12:29 pm

Re: Version 1.5.2 & 1.4.5

Post by kamiller42 »

UsernameTaken, I am watching your thread and hoping it fixes my router.

Some details on my router is I am using wireless-N, channel 1. Channel doesn't matter; problem remains.

I am using WPA-PSK2. channel width 20mhz, transmit power max. I don't think any of this matters. I could be wrong.

The only setting I found that seemed to fix things was to change from N+G+B to G+B. I changed versions a little while after going G, so I did not toggle in and out of N to be completely sure. Test results have to be repeatable.

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: Version 1.5.2 & 1.4.5

Post by hnl_dk »

kamiller42 wrote:UsernameTaken, I am watching your thread and hoping it fixes my router.

Some details on my router is I am using wireless-N, channel 1. Channel doesn't matter; problem remains.

I am using WPA-PSK2. channel width 20mhz, transmit power max. I don't think any of this matters. I could be wrong.

The only setting I found that seemed to fix things was to change from N+G+B to G+B. I changed versions a little while after going G, so I did not toggle in and out of N to be completely sure. Test results have to be repeatable.
Compared to yours, I am running N+G+B, 40MHz+, Max, WPA2-PSK.
I have no problem.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

UsernameTaken
Posts: 34
Joined: Mon Feb 28, 2011 4:27 pm

Re: Version 1.5.2 & 1.4.5

Post by UsernameTaken »

Make a post in troubleshooting and please add your wifi settings
My wifi settings are nothings special: WPA2 psk, 20 mhz, plain AP. b+g+n
The router is a 1043nd v1.8.

I rather not reiterate everything I've said in my comments somewhere else. I feel they are in context here. But the mods should feel free to move my comments around as they please.

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: Version 1.5.2 & 1.4.5

Post by hnl_dk »

UsernameTaken wrote:
Make a post in troubleshooting and please add your wifi settings
My wifi settings are nothings special: WPA2 psk, 20 mhz, plain AP. b+g+n
The router is a 1043nd v1.8.

I rather not reiterate everything I've said in my comments somewhere else. I feel they are in context here. But the mods should feel free to move my comments around as they please.
But this is the news forum, that is made for Eric to post when there is a new release.
"Troubleshooting / Report Bugs" is made for us to report if we have trouble.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

Trailblazer
Posts: 113
Joined: Wed Mar 09, 2011 3:12 am

Re: Version 1.5.2 & 1.4.5

Post by Trailblazer »

UsernameTaken wrote:It happened again. Wifi has slowed down to a crawl again (0.54 Mbit/s down vs 11 after reboot)..
That is the problem I'm having as well...slows to a crawl until reboot (which I set to do every night). I went back to 1.3.14 which I always had good luck with-same problem. I'm thinking that I need to do the DDWRT 30/30/30 resets from now on. I'm going to try and install one of these new versions. Hopefully that will be over!
Netgear WNDR3700V2 Gargoyle 1.10.0
TP-LINK Archer C7 v4 Gargoyle 1.12

UsernameTaken
Posts: 34
Joined: Mon Feb 28, 2011 4:27 pm

Re: Version 1.5.2 & 1.4.5

Post by UsernameTaken »

But this is the news forum, that is made for Eric to post when there is a new release.
"Troubleshooting / Report Bugs" is made for us to report if we have trouble.


I guess I just have a rebellious streak when it comes to commenting on new releases of third party firmware. Also, what would be the point of allowing comments on news threads if commenting on the that particular news was frowned upon.


I've installed vanilla openwrt now, in order to determine if the problem is gargoyle specific or openwrt specific.

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: Version 1.5.2 & 1.4.5

Post by hnl_dk »

UsernameTaken wrote:...
I've installed vanilla openwrt now, in order to determine if the problem is gargoyle specific or openwrt specific.
Perfect, looking forward to hear what the result will be.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

Post Reply