Version 1.11.0 : Based on OpenWrt 18.06

The latest news about Gargoyle

Moderator: Moderators

Lantis
Moderator
Posts: 5424
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by Lantis »

LMP wrote:I can't find download for wr741 and wr740.


Those routers are 4MB, and are no longer supported by Gargoyle (and generally Openwrt as well).
Sorry about that.
You could try sticking with an older version, but my recommendation would be to invest in an upgrade :)
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

ispyisail
Moderator
Posts: 4763
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by ispyisail »

LMP wrote:I can't find download for wr741 and wr740.


end of life in respect to gargoyle

LMP
Posts: 15
Joined: Sun Feb 23, 2014 11:09 am

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by LMP »

Lantis wrote:
LMP wrote:I can't find download for wr741 and wr740.


Those routers are 4MB, and are no longer supported by Gargoyle (and generally Openwrt as well).
Sorry about that.
You could try sticking with an older version, but my recommendation would be to invest in an upgrade :)



Yes, but it does not appear any more in the old versions like 1.10. He appeared before.

RomanHK
Posts: 567
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by RomanHK »

EDIT: Moved to the RC section, I'm sorry. :oops:
viewtopic.php?f=14&t=11829&start=160#p52111
Last edited by RomanHK on Fri Feb 22, 2019 10:58 am, edited 2 times in total.
Turris Omnia with Gargoyle 1.12.0
Linksys WRT3200ACM with Gargoyle 1.12.0
TL-WR1043ND v2 with Gargoyle 1.10.0

User avatar
CBx86
Posts: 127
Joined: Sun Jan 05, 2014 5:43 pm
Location: Brazil

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by CBx86 »

Fresh Meat!
Many thanks all guys!
Will try it tomorrow! :D

ViBE
Posts: 152
Joined: Sun Apr 19, 2015 6:58 pm

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by ViBE »

LMP wrote:
Lantis wrote:
LMP wrote:I can't find download for wr741 and wr740.


Those routers are 4MB, and are no longer supported by Gargoyle (and generally Openwrt as well).
Sorry about that.
You could try sticking with an older version, but my recommendation would be to invest in an upgrade :)



Yes, but it does not appear any more in the old versions like 1.10. He appeared before.

i don't see either on the list at the older release. i still planning an update on my WR741ND. so it's heartbreaking.

Lantis
Moderator
Posts: 5424
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by Lantis »

@lesbinary
I haven't ignored your feedback. I just want to take the time to address it properly, and for that i need to check a few things.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

goatman64
Posts: 4
Joined: Mon Dec 25, 2017 3:46 pm

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by goatman64 »

First off, thanks for all the work on gargoyle!

I had a working config of 1.10.0 I made a backup of my config and applied 1.11.0, rebooted. I could see my wireless network but could not lease an ip.

Will try the following procedure tonight

Procedure for 1.10.x and above
To recover:

Install Wireshark on your computer.
Configure your computer with static IP 192.168.1.2
Connect your computer to a LAN port on the router.
Start Wireshark and monitor the LAN connection.
Powerup your router, when wireshark shows the first packet from 192.168.1.1 immediately press and hold the reset button on the back of the router for three seconds.
Router power LED should be flashing quickly. (Failsafe mode)
SSH via putty to “192.168.1.1”
at the Gargoyle prompt type firstboot
wait until the command prompt returns
power cycle the router.

ispyisail
Moderator
Posts: 4763
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by ispyisail »

I had a working config of 1.10.0 I made a backup of my config and applied 1.11.0, rebooted


What does this mean?

You installed 1.11.0 then used a backup config from an old version then broke your router.

If this is the case, this is expected behaviour

goatman64
Posts: 4
Joined: Mon Dec 25, 2017 3:46 pm

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by goatman64 »

Apologies on the poor explanation.

I had a working 1.10.0 config.
Applied the 1.11.0 upgrade and rebooted
After reboot I could see my wireless networks but couldn't join

I did not apply a backup from my 1.10 version.

I will try the recovery procedure later today.

Thanks

Post Reply