Gargoyle Forum

pbix wrote:Gargoyle does not support PPPoA.
I recommend that you go the PPPoE route.

thanks for the info

Hi Guys, Appreciate if anyone with similar setup can help. I couldn't get PPPoA to work. The ISP support both PPPoA/Vc-Mux & PPPoE/LLC but PPPoA is recommended I already have openwrt backfire RC5 on buffalo WZR-HP-G300NH now connected via billion 5200SRD in bridge mode through PPPoE/w LLC. I'm n...

I'm still have the same issue despite replacing all wireless clients to those that support the newer N standard

jazz, Check the DD-WRT wiki for Wireless-N configs and 40mhz/300mbps settings and tweaks. It's generic in that it should apply to any firmware. When you are running 40mhz, you should only be choosing channels 1, 6, or 11 for proper 40mhz operation And of course WPA2-AES is the only encryption possi...

Hi Guys, Here's my setup. I had experimented with several different channels but I could not get my thinkpad x61 to connect reliability, coupled with poor throughput and plenty of dropouts when configured at 40MHz mode. No issues on 20MHz mode but throughput was less half of what I could achieve on ...