Hi Guys,
Appreciate if anyone with similar setup can help. I couldn't get PPPoA to work. The ISP support both PPPoA/Vc-Mux & PPPoE/LLC but PPPoA is recommended
I already have openwrt backfire RC5 on buffalo WZR-HP-G300NH now connected via billion 5200SRD in bridge mode through PPPoE/w LLC. I'm now trying to get connected via PPPoA. I've already changed the bridge mode on the modem to use Vc-Mux encaps.
I have kmod-ppp-2.6.32.27-1, kmod-pppoa-2.6.32.27-1, ppp-mod-pppoa-2.4.4-16 to enable PPPoA, it's strange PPPoA is not working.
Here's my network config file:
config 'interface' 'loopback'
option 'ifname' 'lo'
option 'proto' 'static'
option 'ipaddr' '127.0.0.1'
option 'netmask' '255.0.0.0'
config 'interface' 'lan'
option 'ifname' 'eth0'
option 'type' 'bridge'
option 'proto' 'static'
option 'ipaddr' '192.168.1.1'
option 'netmask' '255.255.255.0'
option 'dns' '8.8.8.8 8.8.4.4'
config 'interface' 'wan'
option 'dns' '8.8.8.8 8.8.4.4'
option 'ifname' 'pppoa-wan'
option 'proto' 'pppoa'
option 'encaps' 'vc'
option 'username' '********@dsl2.iprimus.com.au'
option 'password' '********'
option 'keepalive' '3 5'
option 'mtu' '1462'
config 'switch'
option 'name' 'switch0'
option 'reset' '1'
option 'enable_vlan' '1'
config 'switch_vlan'
option 'device' 'switch0'
option 'vlan' '1'
option 'ports' '0 1 2 3 5'
installed modules:
root@Gargoyle:~# opkg list-installed
badblocks - 1.41.11-1
base-files - 43.27-unknown
blkid - 1.41.11-1
bridge - 1.4-1
busybox - 1.15.3-2
bwmon-gargoyle - 1.4.0-1
crda - 1.1.1-1
ddns-gargoyle - 1.4.0-1
disktype - 9-1
dnsmasq - 2.55-6
dosfsck - 3.0.9-1
dropbear - 0.53.1-4
e2fsprogs - 1.41.11-1
ebtables - 2.0.9-1-1
ewget - 1.4.0-1
fdisk - 2.13.0.1-4
firewall - 2-34
gargoyle - 1.4.0-6
gargoyle-firewall-util - 1.4.0-1
haserl - 0.9.26-1
hostapd-mini - 20110527-1
hotplug2 - 1.0-beta-3
httpd-gargoyle - 1.4.0-1
ip - 2.6.29-1-2
iptables - 1.4.6-3.1
iptables-mod-bandwidth - 1.4.6-3.1
iptables-mod-conntrack - 1.4.6-3.1
iptables-mod-conntrack-extra - 1.4.6-3.1
iptables-mod-filter - 1.4.6-3.1
iptables-mod-imq - 1.4.6-3.1
iptables-mod-ipopt - 1.4.6-3.1
iptables-mod-iprange - 1.4.6-3.1
iptables-mod-nat - 1.4.6-3.1
iptables-mod-nat-extra - 1.4.6-3.1
iptables-mod-timerange - 1.4.6-3.1
iptables-mod-webmon - 1.4.6-3.1
iptables-mod-weburl - 1.4.6-3.1
iw - 0.9.22-2
kernel - 2.6.32.27-1
kmod-ath - 2.6.32.27+2011-06-22-2
kmod-ath9k - 2.6.32.27+2011-06-22-2
kmod-ath9k-common - 2.6.32.27+2011-06-22-2
kmod-atm - 2.6.32.27-1
kmod-button-hotplug - 2.6.32.27-1
kmod-cfg80211 - 2.6.32.27+2011-06-22-2
kmod-crc-ccitt - 2.6.32.27-1
kmod-crc16 - 2.6.32.27-1
kmod-crypto-aes - 2.6.32.27-1
kmod-crypto-arc4 - 2.6.32.27-1
kmod-crypto-core - 2.6.32.27-1
kmod-ebtables - 2.6.32.27-1
kmod-fs-autofs4 - 2.6.32.27-1
kmod-fs-exportfs - 2.6.32.27-1
kmod-fs-ext2 - 2.6.32.27-1
kmod-fs-ext3 - 2.6.32.27-1
kmod-fs-ext4 - 2.6.32.27-1
kmod-fs-mbcache - 2.6.32.27-1
kmod-fs-msdos - 2.6.32.27-1
kmod-fs-nfs - 2.6.32.27-1
kmod-fs-nfs-common - 2.6.32.27-1
kmod-fs-nfsd - 2.6.32.27-1
kmod-fs-vfat - 2.6.32.27-1
kmod-fuse - 2.6.32.27-1
kmod-input-core - 2.6.32.27-1
kmod-input-gpio-buttons - 2.6.32.27-1
kmod-input-polldev - 2.6.32.27-1
kmod-ipt-bandwidth - 2.6.32.27-1
kmod-ipt-conntrack - 2.6.32.27-1
kmod-ipt-conntrack-extra - 2.6.32.27-1
kmod-ipt-core - 2.6.32.27-1
kmod-ipt-filter - 2.6.32.27-1
kmod-ipt-imq - 2.6.32.27-1
kmod-ipt-ipopt - 2.6.32.27-1
kmod-ipt-iprange - 2.6.32.27-1
kmod-ipt-nat - 2.6.32.27-1
kmod-ipt-nat-extra - 2.6.32.27-1
kmod-ipt-nathelper - 2.6.32.27-1
kmod-ipt-timerange - 2.6.32.27-1
kmod-ipt-webmon - 2.6.32.27-1
kmod-ipt-weburl - 2.6.32.27-1
kmod-leds-gpio - 2.6.32.27-1
kmod-mac80211 - 2.6.32.27+2011-06-22-2
kmod-nls-base - 2.6.32.27-1
kmod-nls-cp1250 - 2.6.32.27-1
kmod-nls-cp1251 - 2.6.32.27-1
kmod-nls-cp437 - 2.6.32.27-1
kmod-nls-cp775 - 2.6.32.27-1
kmod-nls-cp850 - 2.6.32.27-1
kmod-nls-cp852 - 2.6.32.27-1
kmod-nls-cp866 - 2.6.32.27-1
kmod-nls-iso8859-1 - 2.6.32.27-1
kmod-nls-iso8859-13 - 2.6.32.27-1
kmod-nls-iso8859-15 - 2.6.32.27-1
kmod-nls-iso8859-2 - 2.6.32.27-1
kmod-nls-koi8r - 2.6.32.27-1
kmod-nls-utf8 - 2.6.32.27-1
kmod-ppp - 2.6.32.27-1
kmod-pppoa - 2.6.32.27-1
kmod-pppoe - 2.6.32.27-1
kmod-sched - 2.6.32.27-1
kmod-scsi-core - 2.6.32.27-1
kmod-textsearch - 2.6.32.27-1
kmod-usb-core - 2.6.32.27-1
kmod-usb-ohci - 2.6.32.27-1
kmod-usb-storage - 2.6.32.27-1
kmod-usb-storage-extras - 2.6.32.27-1
kmod-usb2 - 2.6.32.27-1
libblkid - 1.41.11-1
libc - 0.9.30.1-43.27
libcyassl - 1.6.5-3
libericstools - 1.4.0-1
libevent - 1.4.13-2
libext2fs - 1.41.11-1
libgcc - 4.3.3+cs-43.27
libip4tc - 1.4.6-3.1
libip6tc - 1.4.6-3.1
libiptbwctl - 1.4.0-1
libiptc - 1.4.6-3.1
libncurses - 5.7-2
libnl-tiny - 0.1-1
libpthread - 0.9.30.1-43.27
librt - 0.9.30.1-43.27
libuci - 12012009.6-4
libuuid - 1.41.11-1
libwrap - 7.6-1
libxtables - 1.4.6-3.1
linux-atm - 2.5.1-1
miniupnpd - 1.5.20110309-1
mtd - 13
nano - 2.2.6-1
nfs-kernel-server - 1.1.6-1
nfs-kernel-server-utils - 1.1.6-1
nfs-utils - 1.1.6-1
ntfs-3g - 2010.8.8-1-fuseint
ntpclient - 2007_365_1-1
opkg - 576-1
plugin-gargoyle-usb-storage - 1.4.0-1
portmap - 6.0-2
ppp - 2.4.4-16
ppp-mod-pppoa - 2.4.4-16
ppp-mod-pppoe - 2.4.4-16
qos-gargoyle - 1.4.0-1
samba3 - 3.0.24-7
sha1sum - 1.4.0-1
swconfig - 9
tc - 2.6.29-1-2
uci - 12012009.6-4
udevtrigger - 106-1
uuidgen - 1.41.11-1
vsc7385-ucode-ap83 - 1
vsc7385-ucode-pb44 - 1
vsc7395-ucode-ap83 - 1
vsc7395-ucode-pb44 - 1
webmon-gargoyle - 1.4.0-1
wireless-tools - 29-4
wol - 0.7.1-2
wpa-supplicant-mini - 20110527-1
wpad-mini - 20110527-1
PPPoA not working :(
Moderator: Moderators
Re: PPPoA not working :(
Gargoyle does not support PPPoA.
I recommend that you go the PPPoE route.
I recommend that you go the PPPoE route.
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
-
- Posts: 5
- Joined: Sat Jul 30, 2011 10:37 am
Re: PPPoA not working :(
thanks for the infopbix wrote:Gargoyle does not support PPPoA.
I recommend that you go the PPPoE route.