This is an old revision of the document!
On a Windows PC install the printer driver as per manufactures instructions.
For this example the USB cable was plugged from PC to printer with both devices powered up first. The install wizard should then detect and install the printer drives automatically.
Print a test page to make sure it is working correctly.
In printer Properties. (right click on the Printer icon)
(you don't need the Printer attached to the for this)
Then Click Ports
In there Click Add Port.
Select Standard TCP/IP Port, then New Port
Wizard starts,
Click Next
In the next page type in the IP Address of your Router with the Printer attached. (e.g. 192.168.15.1). The second line fills its self in.
Then Click Next and wait
Use the Drop Down arrow to select “HP JetDirect”
Note: For this example a Brother Printer is used but HP JetDirect is selected
Then Next and Finished
The Wizards should have added the Port to the Printer
Plug uour USB printer cable into your Gargoyle router (make sure both devices are powered up). Then check that Gargoyle has found your printer.
Then all that you need to do is re-print a test page.