Differences

This shows you the differences between two versions of the page.

--- usb_attached_printer [2012/01/20 02:04]
ispyisail
+++ usb_attached_printer [2019/02/02 06:47] (current)
ispyisail [Install Printer Drivers]
@@ Line 1: / Line 1: @@
 ====== USB Attached Printer ======
 ===== Install Printer Drivers =====
-On a Windows PC install the printer driver as per manufactures instructions.
+On a Windows PC make a direct connection to a local printer via USB cable. Install the printer driver and configure as per manufactures instructions.
-For this example the USB cable was plugged from printer to PC. The install wizard then installed the drives automatically.
+{{:gallery:gargoyle_usb_printer.png?300|}}
+For this example the USB cable was plugged from printer to PC. Make sure both devices powered up first. The install wizard should then detect and install the printer driver automatically.
 {{ :print1.png?300 |}}
@@ Line 15: / Line 21: @@
-In printer Properties. (click Customise Printer)
+In printer Properties. (right click on the Printer icon)
 (you don't need the Printer attached to the for this)
+{{ ::print10.png?300 |}}
 Then Click Ports
-{{ ::print3.png?300 |}}
 In there Click Add Port.
+{{ ::print3.png?300 |}}
 Select Standard TCP/IP Port, then New Port
@@ Line 33: / Line 43: @@
 Click Next
-In the next page type in the IP Address of your Router with the Printer attached. (e.g. 192.168.1.1). The second line fills its self in.
+In the next page type in the IP Address of your Router with the Printer attached. (e.g. 192.168.15.1). The second line fills its self in.
-{{ ::print5.png?300 |}}
+{{ ::print5a.png?300 |}}
 Then Click Next and wait
-Use the Drop Down arrow to select "HP JetDirect"
+Use the Drop Down arrow to select "HP JetDirect" \\ Note: For this example a Brother Printer is used but HP JetDirect is selected
+{{ ::print6.png?300 |}}
 Then Next and Finished
+{{ ::print7.png?300 |}}
 The Wizards should have added the Port to the Printer
-Then all that you need to do is Print off a test page and jobs done
+===== Gargoyle Check =====
+Plug uour USB printer cable into your Gargoyle router (make sure both devices are powered up). Then check that Gargoyle has found your printer.
+{{ :print8.png?300 |}}
+===== Final Test =====
+Then all that you need to do is re-print a test page.

Gargoyle Wiki

User Tools

Site Tools

Differences

Page Tools