This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
supported_routers_-_tested_routers [2015/11/16 19:39] nworbnhoj [Atheros AR71XX Routers:] Remove TL-WR841N v1.5 w/- 8MB RAM err |
supported_routers_-_tested_routers [2019/12/21 18:15] (current) ispyisail [Marvell Armada XP/370 Routers:] |
||
---|---|---|---|
Line 14: | Line 14: | ||
* **Recommended minimum** 8MB of FLASH and 32MB of RAM to run the latest versions of Gargoyle. | * **Recommended minimum** 8MB of FLASH and 32MB of RAM to run the latest versions of Gargoyle. | ||
- | * **Bare minimum** 4MB of FLASH and 32MB of RAM __may__ | + | * **Bare minimum** 4MB of FLASH and 32MB of RAM will NOT run latest versions of Gargoyle |
* **Sub-minimum** routers with only 16MB of RAM are best matched with Gargoyle 1.2.5, which has a smaller memory footprint. | * **Sub-minimum** routers with only 16MB of RAM are best matched with Gargoyle 1.2.5, which has a smaller memory footprint. | ||
Line 26: | Line 26: | ||
\\ \\ | \\ \\ | ||
+ | |||
+ | ====Marvell Armada XP/370 Routers: | ||
+ | |||
+ | Routers with this architecture are fully supported for Gargoyle. | ||
+ | |||
+ | There are typically two files available for each of these routers: | ||
+ | |||
+ | * use **factory.bin** to __install__ Gargoyle over the original manufacturer' | ||
+ | * use **sysupgrade.bin** to __upgrade__ an existing Gargoyle/ | ||
+ | |||
+ | === Linksys === | ||
+ | |||
+ | ^ Model ^ RAM ^ Flash ^ CPU MHz ^ Firmware File(s) ^ | ||
+ | ^ Linksys WRT AC Series ||||| | ||
+ | | WRT1200AC v1 (Caiman) | 512MB | 128NAND | 2x 1300 | *-mvebu-cortexa9-linksys-wrt1200ac-squashfs-* | | ||
+ | | WRT1200AC v2 (Caiman) | 512MB | 128NAND | 2x 1300 | *-mvebu-cortexa9-linksys-wrt1200ac-squashfs-* | | ||
+ | | WRT1900AC v1 (Mamba) | 256MB | 128NAND | 2x 1200 | *-mvebu-cortexa9-linksys-wrt1900ac-squashfs-* | | ||
+ | | WRT1900AC v2 (Cobra) | 512MB | 128NAND | 2x 1600 | *-mvebu-cortexa9-linksys-wrt1900acv2-squashfs-* | | ||
+ | | WRT1900ACS v1 (Shelby) | 512MB | 128NAND | 2x 1600 | *-mvebu-cortexa9-linksys-wrt1900acs-squashfs-* | | ||
+ | | WRT1900ACS v2 (Shelby) | 512MB | 128NAND | 2x 1600 | *-mvebu-cortexa9-linksys-wrt1900acs-squashfs-* | | ||
+ | | WRT3200ACM v1 (Rango) | 512MB | 256NAND | 2x 1866 | *-mvebu-cortexa9-linksys-wrt3200acm-squashfs-* | | ||
+ | | WRT32X v1 (Venom) | 512MB | 256NAND | 2x 1866 | *-mvebu-cortexa9-linksys-wrt32x-squashfs-* | | ||
+ | |||
+ | === Turris Omnia === | ||
+ | |||
+ | ^ Model ^ RAM ^ Flash ^ CPU MHz ^ Firmware File(s) ^ | ||
+ | ^ Turris Omnia ||||| | ||
+ | | Turris Omnia | 1-2 GB | 8 GB Flash | 2 x 1600 | *-mvebu-cortexa9-turris-omnia-* | | ||
+ | |||
====Atheros AR71XX Routers: | ====Atheros AR71XX Routers: | ||
- | Routers with this architecture are the best-supported | + | These routers |
There are typically two files available for each of these routers: | There are typically two files available for each of these routers: | ||
Line 38: | Line 67: | ||
^ Model ^ RAM ^ Flash ^ USB ^ Firmware File(s) ^ | ^ Model ^ RAM ^ Flash ^ USB ^ Firmware File(s) ^ | ||
+ | ^ GL.iNet||||| | ||
+ | |GL.iNet AR150 | 64MB | 16MB | 1 | *-generic-gl_ar150-* | | ||
^ TP-Link Routers (([[tp-link-install|install notes]])) ||||| | ^ TP-Link Routers (([[tp-link-install|install notes]])) ||||| | ||
| TL-Archer C7 v2 (([[http:// | | TL-Archer C7 v2 (([[http:// | ||
Line 50: | Line 81: | ||
| TL-WR941ND v2 v3(([[http:// | | TL-WR941ND v2 v3(([[http:// | ||
| TL-WR841ND v3-9 (([[http:// | | TL-WR841ND v3-9 (([[http:// | ||
- | | TL-WR741ND\\ v1-1.9 | + | | TL-WR741ND v1-1.9 |
+ | | TL-WR741ND | ||
^ Buffalo Routers ||||| | ^ Buffalo Routers ||||| | ||
| WZR-600DHP | 128MB | 32MB | 1 | *-ag300h-* | | | WZR-600DHP | 128MB | 32MB | 1 | *-ag300h-* | | ||
| WZR-HP-G300NH(([[buffalo_wzr-hp-g300nh|install notes]])) | 64MB | 32MB | 1 | *-wzr-hp-g300nh-* | | | WZR-HP-G300NH(([[buffalo_wzr-hp-g300nh|install notes]])) | 64MB | 32MB | 1 | *-wzr-hp-g300nh-* | | ||
^ Netgear Routers ||||| | ^ Netgear Routers ||||| | ||
- | | WNDR3700v2 | 64MB | 16MB | 1 | *-wndr3700-* | | ||
| WNDR3700v1 | 64MB | 8MB | 1 | *-wndr3700-* | | | WNDR3700v1 | 64MB | 8MB | 1 | *-wndr3700-* | | ||
+ | | WNDR3700v2 | 64MB | 16MB | 1 | *-wndr37002-* | | ||
+ | | WNDR3700v4 | 128MB | 128MB | 1 | *-wndr3700v4-* | | ||
+ | | WNDR3800 | 128MB | 16MB | 1 | *-wndr3800-* | | ||
+ | | WNDR4300v1 | 128MB | 128MB | 1 | *-wndr4300-* | | ||
+ | | WNDRMAC | 16MB | 64MB | 1 | *-wndrmac-* | | ||
+ | | WNDRMACv2 | 16MB | 128MB | 1 | *-wndrmacv2-* | | ||
^ D-Link Routers ||||| | ^ D-Link Routers ||||| | ||
| DIR-825 b1,b2| 64MB | 8MB | 1 | *-dir-825-* | | | DIR-825 b1,b2| 64MB | 8MB | 1 | *-dir-825-* | |