Differences

This shows you the differences between two versions of the page.

--- routertorouter [2012/07/05 09:06]
ispyisail
+++ routertorouter [2013/05/21 15:58] (current)
eric
@@ Line 1: / Line 1: @@
 ====== OpenVPN Site to Site======
-{{INLINETOC 2 4 }}
 ===== Introduction =====
 This how-to is a step by step guide for setting up two gargoyle routers with a site to site configuration.
 {{ :gargoyle_-_openvpn_router_to_router.png?450 |}}
+==== Subnet Addressing ====
+The server and client should not have identical LAN subnets, e.g.
+VPN Server could have a 192.168.2.0/255.255.255.0
+VPN Client could have 192.168.3.0/255.255.255.0
+This applies for all routers/switches/firewalls in the VPN circuit
 ==== Port Forward ====
@@ Line 13: / Line 22: @@
 If you don't have a fixed IP from your ISP you will need to set-up a Dynamic DNS Services. see [[dynamic_dns_services|Dynamic DNS Services]]
+==== OpenVPN server ====
+Set-up the server
+{{ ::server.jpg?450 |}}
+==== OpenVPN Client File ====
+Enter client config settings, save then download to you PC
+{{ ::vpn_client1.jpg?450 |}}
+{{ ::vpn_client2.jpg?450 |}}
+==== Client Router ====
+On the client router load the config file then save changes
+{{ ::vpn_client3.jpg?450 |}}

Gargoyle Wiki