At the advice from someone at FoneraHacks, I tried to load Gargoyle on my Fonera+ 2201 device.
Unfortunately, when I completed the firmware changes using the directions, I got the below from the Serial Console, and it just hangs. I even left it alone for several hours to ensure I wasn't just being impatient.
If I revert back to 1.1.1r1 it loads as expect and brings up the Fon configurations and everything.
Any help would be greatly appreciated.
--Pat
Code: Select all
Ethernet eth0: MAC address 00:18:84:a3:33:d4
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.254
RedBoot(tm) bootstrap and debug environment [ROMRAM]
OpenWrt certified release, version 1.1 - built 22:32:28, May 7 2007
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: FON 2201
RAM: 0x80000000-0x81000000, [0x80040290-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 5.000 seconds - enter ^C to abort
RedBoot> fis load -l vmlinux.bin.l7
Image loaded from 0x80041000-0x80290085
RedBoot> exec
Now booting linux kernel:
Base address 0x80030000 Entry 0x80041000
Cmdline :