use sysdupgrade.bin only when coming from the stock firmware

[meazz1]

I have a quick question:
If I am going from an OpenWrt firmware to Gargoyle do I need to flash the "sysupgrade.bin" file?
Is the "sysupgrade.bin" only needed if I am coming from the stock fw or do I need to flash it first each time I am upgrading Gargoyle from build to build?

[nworbnhoj]

factory.bin is only needed once to move away from stock factory firmware.

Once you are on openWRT or Gargoyle always use the sysupgrade.bin

[meazz1]

^^ Thnx for the clarification.