Router Firmware Requests

Suggest improvements and new features for Gargoyle.

Moderator: Moderators

fengchen_gf
Posts: 25
Joined: Sun Dec 13, 2015 12:53 am

Re: Router Firmware Requests

Postby fengchen_gf » Wed Jan 11, 2017 10:07 pm

Router Model: Ubiquiti EdgeRouter X (ER-X)
Link to Openwrt wiki: https://wiki.openwrt.org/toh/ubiquiti/ubiquiti_edgerouter_x_er-x_ka
Is it supported in Openwrt Chaos_Calmer Branch? NO.https://downloads.lede-project.org/snapshots/targets/ramips/mt7621/lede-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar
Does it have >= 8MB of flash? Yes.256 MB NAND
Does it have USB support? NO
J1900 x86-64 fanless computer: Gargoyle 1.10.X
Netgear wndr4300v1&wndr3700v4: sold out
ASUS ACRH17 :asuswrt as AP

N270 x86 fanless computer: Gargoyle 1.10.X
TP-LINK C7V2:OpenWrt18.06.1 as AP
TP-LINK TL-WR741V4:switch

kandrix
Posts: 4
Joined: Wed Jan 04, 2017 1:38 pm

Re: Router Firmware Requests

Postby kandrix » Wed Jan 11, 2017 11:25 pm

Router Model: Dlink Dir-615 E5
Link to Openwrt wiki: https://wiki.openwrt.org/toh/d-link/dir-615
Is it supported in Openwrt? Yes
Does it have >= 8MB of flash? No
Does it have >= 4MB of flash? Yes
Does it have USB support? No
****************************************************************************

I am currently in this version of GARGOYLE 1.5.10
LINK: http://www.gargoyle-router.com/download ... actory.bin

It works great but I would like a new update to use OPENVPN, Client - Server PPTP and Spanish translation.

I tested with higher versions 1.5.11
LINK: http://www.gargoyle-router.com/download ... actory.bin

It updates perfectly, works well, the only problem is that when you turn off the router or restart it goes back to the default settings and the saved settings are not kept.

Lantis
Moderator
Posts: 5187
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Postby Lantis » Thu Jan 12, 2017 2:17 am

fengchen_gf wrote:Router Model: Ubiquiti EdgeRouter X (ER-X)
Link to Openwrt wiki: https://wiki.openwrt.org/toh/ubiquiti/ubiquiti_edgerouter_x_er-x_ka
Is it supported in Openwrt Chaos_Calmer Branch? NO.https://downloads.lede-project.org/snapshots/targets/ramips/mt7621/lede-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar
Does it have >= 8MB of flash? Yes.256 MB NAND
Does it have USB support? NO


I can't do anything with Lede support only at this time sorry.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

Lantis
Moderator
Posts: 5187
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Postby Lantis » Thu Jan 12, 2017 2:17 am

kandrix wrote:Router Model: Dlink Dir-615 E5
Link to Openwrt wiki: https://wiki.openwrt.org/toh/d-link/dir-615
Is it supported in Openwrt? Yes
Does it have >= 8MB of flash? No
Does it have >= 4MB of flash? Yes
Does it have USB support? No
****************************************************************************

I am currently in this version of GARGOYLE 1.5.10
LINK: http://www.gargoyle-router.com/download ... actory.bin

It works great but I would like a new update to use OPENVPN, Client - Server PPTP and Spanish translation.

I tested with higher versions 1.5.11
LINK: http://www.gargoyle-router.com/download ... actory.bin

It updates perfectly, works well, the only problem is that when you turn off the router or restart it goes back to the default settings and the saved settings are not kept.


With 4mb of flash this router is no longer supported
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

fengchen_gf
Posts: 25
Joined: Sun Dec 13, 2015 12:53 am

Re: Router Firmware Requests

Postby fengchen_gf » Thu Jan 12, 2017 9:29 am

Lantis wrote:
fengchen_gf wrote:Router Model: Ubiquiti EdgeRouter X (ER-X)
Link to Openwrt wiki: https://wiki.openwrt.org/toh/ubiquiti/ubiquiti_edgerouter_x_er-x_ka
Is it supported in Openwrt Chaos_Calmer Branch? NO.https://downloads.lede-project.org/snapshots/targets/ramips/mt7621/lede-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar
Does it have >= 8MB of flash? Yes.256 MB NAND
Does it have USB support? NO


I can't do anything with Lede support only at this time sorry.


openwrt Development Snapshots:
https://downloads.openwrt.org/snapshots/trunk/ramips/mt7621/openwrt-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar
J1900 x86-64 fanless computer: Gargoyle 1.10.X
Netgear wndr4300v1&wndr3700v4: sold out
ASUS ACRH17 :asuswrt as AP

N270 x86 fanless computer: Gargoyle 1.10.X
TP-LINK C7V2:OpenWrt18.06.1 as AP
TP-LINK TL-WR741V4:switch

Lantis
Moderator
Posts: 5187
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Postby Lantis » Thu Jan 12, 2017 3:33 pm

I can't do anything with that either.
Gargoyle is chaos calmer based. I'm nit going to spend an eon migrating it for one custom image that might not even work.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

lunar_walker
Posts: 6
Joined: Wed Feb 08, 2017 12:31 pm

Re: Router Firmware Requests

Postby lunar_walker » Sat Feb 11, 2017 5:34 pm

Hi,
First time posting in requests.
I req x86 build with builtin intel 1gbps ethernet and broadcom PCIe ethernet card with 4x ethernet ports.
I tried builds already on your site but broadcom interfaces didn't show up.
I tried building it myself but ran into issues of dependencies.
If you can kindly help me out on this. Need addl broadcom phy drivers support plus USB devices support.

Thanks
BTW my system has more than 1GB RAM and dual core processor.

Lantis
Moderator
Posts: 5187
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Postby Lantis » Sat Feb 11, 2017 6:02 pm

Can you list the names of the drivers you require? Or where to find them in the menu tree?
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

lunar_walker
Posts: 6
Joined: Wed Feb 08, 2017 12:31 pm

Re: Router Firmware Requests

Postby lunar_walker » Sun Feb 12, 2017 12:00 am

Hi Lantis,
Thanks for quick reply. I made another attempt at building 1.9.1 branch (already tried master as well) but ended up with same error of

Code: Select all

Package haserl-i18n is missing dependencies for the following libraries:
libericstools.so.1


Tricky part is I'm not sure which driver will work. I'm sorry for my limited knowledge. But I do know that it is a broadcom PCIe card with 4 x gigabit ports. Currently, pfsense is instl at that box and it is picking up all intel + broadcom (bce0-3) interfaces.

I was hopeful with kmod-phy-broadcom but not sure.
For integrated intel part, kmod-e100, kmod-e1000 should work.
Remaining i want USB storage + printer devices to work. so I included those.
For experimental part, I wanted to include kmod-e1000e & kmod-vmxnet3

I'm mainly interested in its IP - MAC binding through DHCP, QoS, BW & Quota management and firewalling (whitelisting).

Thanks and hoping for best.... :)

Lantis
Moderator
Posts: 5187
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Router Firmware Requests

Postby Lantis » Sun Feb 12, 2017 2:08 am

Can you post the .config file you are using for the build?
I can only presume you have not selected a necessary package.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases


Return to “Feature Requests”

Who is online

Users browsing this forum: No registered users and 2 guests