yep, I used the command /usr/bin/set_kernel_timezone and fixed the time. Could you tell me if your cron is working properly? I'm trying to run znc at startup and it simply doesn`t load up. the command I'm using is /usr/bin/znc -r (yeah, I'm too lazy to run as normal user)Lantis wrote:Finally someone else notices!b0xBR wrote:Installed this build today, running ok. The only bug i've found so far, the time is always UTC, 3 hours ahead of what i've configured (GMT-3). Anyway, thanks for the build.
The thing is even though you set the time it hasn't updated.
Did you try rebooting your router? that will probably fix it.
I know you can force the time to update by doing a "/etc/init.d/system restart"
gargoyle-ispy 2015-October-01 07:49.torrent
Moderator: Moderators
Re: gargoyle-ispy 2015-October-01 07:49.torrent
Re: gargoyle-ispy 2015-October-01 07:49.torrent
Cron works fine.
For running something at startup I'd use an init.d script instead.
For running something at startup I'd use an init.d script instead.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: gargoyle-ispy 2015-October-01 07:49.torrent
Yep, fixed init.d script and it's now working properly.Lantis wrote:Cron works fine.
For running something at startup I'd use an init.d script instead.
Re: gargoyle-ispy 2015-October-01 07:49.torrent
I found another bug: "Wireless Client Isolation" not work?.Extract the file is still the same after the restart (/var/run/hostapd_phy0.conf) and do not know if this is a good value: ap_isolate=1 (this value is still there)?
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
-
- Posts: 30
- Joined: Thu Sep 24, 2015 4:46 am
- Location: United Kingdom
- Contact:
Re: gargoyle-ispy 2015-October-01 07:49.torrent
Im using this build on a TP-Link TL-WDR3600 V1.5 and i have noticed the web gui is slow at responding, Sometime it will timeout however 1.8.0 never used to do this.
Anyone eles notced?
Anyone eles notced?
Last edited by francisuk1989 on Sat Oct 03, 2015 6:36 am, edited 1 time in total.
TP-Link TL-WDR3600 v1.5 (ar71xx)
EE Brightbox 1/Arcadyan AR7516 (BCM63xx)
MK RB750r2 - OpenWrt Snapshot ar71xx
D-Link DIR-615 D2 - OpenWrt (ramips/rt305x)
AWS Region Latency Checker # http://awsspeedtest.xvf.dk
EE Brightbox 1/Arcadyan AR7516 (BCM63xx)
MK RB750r2 - OpenWrt Snapshot ar71xx
D-Link DIR-615 D2 - OpenWrt (ramips/rt305x)
AWS Region Latency Checker # http://awsspeedtest.xvf.dk
Re: gargoyle-ispy 2015-October-01 07:49.torrent
Hi i have same router and web gui is nice and fast for me did you doo a cleen install?francisuk1989 wrote:Im using this build on a TL-WDR3600 V1.5 and i have notced the web gui is slow at responding sometime it will timeout however 1.8.0 never used to do this.
If not may be try a firstboot.
Linksys WRT3200ACM
NETGEAR Nighthawk R7800
NETGEAR R6260
NETGEAR Nighthawk R7800
NETGEAR R6260
-
- Posts: 30
- Joined: Thu Sep 24, 2015 4:46 am
- Location: United Kingdom
- Contact:
Re: gargoyle-ispy 2015-October-01 07:49.torrent
When i went from 1.8.0 to this build just went into system > upgrade firmware then this builds firmware, Didnt do "Attempt to Preserve Settings"tapper wrote:Hi i have same router and web gui is nice and fast for me did you doo a cleen install?francisuk1989 wrote:Im using this build on a TL-WDR3600 V1.5 and i have notced the web gui is slow at responding sometime it will timeout however 1.8.0 never used to do this.
If not may be try a firstboot.
Im going to try a firstboot later on as the kids are on there consoles.
Will report back later on.
TP-Link TL-WDR3600 v1.5 (ar71xx)
EE Brightbox 1/Arcadyan AR7516 (BCM63xx)
MK RB750r2 - OpenWrt Snapshot ar71xx
D-Link DIR-615 D2 - OpenWrt (ramips/rt305x)
AWS Region Latency Checker # http://awsspeedtest.xvf.dk
EE Brightbox 1/Arcadyan AR7516 (BCM63xx)
MK RB750r2 - OpenWrt Snapshot ar71xx
D-Link DIR-615 D2 - OpenWrt (ramips/rt305x)
AWS Region Latency Checker # http://awsspeedtest.xvf.dk
Re: gargoyle-ispy 2015-October-01 07:49.torrent
i'm experiencing the slow ui as well. i don't think its a user error.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
-
- Posts: 30
- Joined: Thu Sep 24, 2015 4:46 am
- Location: United Kingdom
- Contact:
Re: gargoyle-ispy 2015-October-01 07:49.torrent
Can confirm this is all working great, No slow GUI (As in the routers webpage)tapper wrote:try a firstboot.
+1 tapper
TP-Link TL-WDR3600 v1.5 (ar71xx)
EE Brightbox 1/Arcadyan AR7516 (BCM63xx)
MK RB750r2 - OpenWrt Snapshot ar71xx
D-Link DIR-615 D2 - OpenWrt (ramips/rt305x)
AWS Region Latency Checker # http://awsspeedtest.xvf.dk
EE Brightbox 1/Arcadyan AR7516 (BCM63xx)
MK RB750r2 - OpenWrt Snapshot ar71xx
D-Link DIR-615 D2 - OpenWrt (ramips/rt305x)
AWS Region Latency Checker # http://awsspeedtest.xvf.dk
Re: gargoyle-ispy 2015-October-01 07:49.torrent
No probs matefrancisuk1989 wrote:Can confirm this is all working great, No slow GUI (As in the routers webpage)tapper wrote:try a firstboot.
+1 tapper
Linksys WRT3200ACM
NETGEAR Nighthawk R7800
NETGEAR R6260
NETGEAR Nighthawk R7800
NETGEAR R6260