Hi Guys,
I've a ADSL modem and TPLINK wr841n router which worked fine with the factory firmware. And then this happened.
1. I wanted to install Garogyle so i can use the Quota feature.
2. I've installed gargoyle_1.8.0-ar71xx-generic-tl-wr841n-v9-squashfs-factory.bin on my wr841n without any issues
3. Now I can login to my router and see Garogyle page and the status everything. But there is NO internet !
Please tell me whats going wrong. My router is receiving IP and there is no issue with the internet on modem(as it works fine when directly wired with PC)
I see DHCP is enabled on both my modem and router. Is this causing a problem? If so I think I need to turn DHCP off in my router which will stop me from accessing the router. So I cannot use the Quota feature of Garogyle.
Desperately waiting for your assistance...
Sid
WR841N lost internet after installing gargoyle_1.8.0
Moderator: Moderators
Re: WR841N lost internet after installing gargoyle_1.8.0
Hi Sid, we need to see a couple of screen shots (or the info off these screens):
Gargoyle - Connection - Basic
Gargoyle - Connection - DHCP
Gargoyle - Connection - Basic
Gargoyle - Connection - DHCP
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
Re: WR841N lost internet after installing gargoyle_1.8.0
Hi
Basic page:
DHCP page
Basic page:
DHCP page
Re: WR841N lost internet after installing gargoyle_1.8.0
and my modem page says connect via PPoE and i've a username and password there. if this might help
Re: WR841N lost internet after installing gargoyle_1.8.0
To understand what is going on, have a read of this doco
http://www.gargoyle-router.com/wiki/dok ... ario-modem
To fix the problem, change your configuration
Gargoyle - Connection - Local Network/LAN
Router IP: 192.168.0.1
After you get that sorted out, some of these might be of interest
http://www.gargoyle-router.com/wiki/dok ... _scenarios
http://www.gargoyle-router.com/wiki/dok ... ario-modem
To fix the problem, change your configuration
Gargoyle - Connection - Local Network/LAN
Router IP: 192.168.0.1
After you get that sorted out, some of these might be of interest
http://www.gargoyle-router.com/wiki/dok ... _scenarios
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
Re: WR841N lost internet after installing gargoyle_1.8.0
Man you are incredible !....
Didnt expect it would be that easy..
And thank you so much for the common scenarios... looks like theres so much in Gargolye than I thot.. Cheers.. have a gud one
Didnt expect it would be that easy..
And thank you so much for the common scenarios... looks like theres so much in Gargolye than I thot.. Cheers.. have a gud one