I Flash it a TL-WR840N V2...[/color]
hi all... I flash a TL-WR840N V2, see all post here and Openwrt, this router is unsoported
https://www.youtube.com/watch?v=rDpEeiDTMmY
says this have 2Mb flash, and chinese version, but no, Gargoyle, Open WRT and DDwrt no support this router, in the forun DDwrt found , This router shares the same hardware as the TL-WR841N/D V9, and had a beta BIN, I tried to direct flash it on the web and gave error like the BIN Gargoyle and OPEN Wrt for the TL-WR841N/D V9. ..
I forced the BIN DDWRT by Putty and serial connection, loaded, but gave error in the LAN, I thought it was a breakthrough, force the Bin OpenWRT by Putty and successfully loaded, once there, loaded the sysupgrade by WEB
https://www.gargoyle-router.com/downloa ... pgrade.bin
only error is in the indicators LED because the firm used is an one router have 8 indicators led, and this router have only 5 indicators and displayed as well...
Power LED = LAN2
WLan LED = WLan
Lan LED = Lan1
WAN Led = WAN
WPS LED = Power
missing LAN3 and LAN4 indicators...
Atheros QCA9533, MIPS 24KC, 560MHz
identical to QCA9531
Design AP143
16MB SDRAM
4MB Flash
4 LAN autosensing 10/100Mbps ports
1 WAN autosensing 10/100Mbps port
Gargoyle Version:1.9.1 (of TL-WR841N/D V9.x)
Regards...