Version 1.7.0 - Barrier Breaker
Moderator: Moderators
Re: Version 1.7.0 - Barrier Breaker
Well, I got same problem despite it has 8mb (1043ndv1)...
Re: Version 1.7.0 - Barrier Breaker
gbdisi wrote:i'm glad to say that i did the upgrade from 1.6.2 to 1.7.0 preserving the configuration and without any problems at all
This might be your case. When devs tell you that it's not recommended to try preserving settings, they don't joke about it, it probably means that problems will occur.WARNING: Do not attempt to preserve settings when upgrading from versions ≤ 1.6.2 to 1.7.0
Gargoyle 1.6.2 @ TL-WR1043ND v1.11 + 4GB USB
Re: Version 1.7.0 - Barrier Breaker
Hi!
When can we expect the stable version?
When can we expect the stable version?
>>>>> Doky <<<<<
Router: TP-Link TL-WR1043ND v2.1 (Gargoyle 1.9)
NAS server: Zyxel NSA-310 (Western Digital Red 1TB)
Router: TP-Link TL-WR1043ND v2.1 (Gargoyle 1.9)
NAS server: Zyxel NSA-310 (Western Digital Red 1TB)
-
- Posts: 12
- Joined: Wed Feb 05, 2014 1:59 pm
Re: Version 1.7.0 - Barrier Breaker
When it's finished and ready.
Re: Version 1.7.0 - Barrier Breaker
Hi!
Just tried the latest 1.7.0 firmware on my TP-Link 1043ND v2.1 and on my 240/20 internet connection I can't reach higher download speed than 120 Mbit/s. When I reset the router in the first seconds after reconnect I can download with 240, but then it goes back to 120 (i think when the services started succesfully). Flashed from stock firmware, tried default settings.
So I'm currently back to 1.6.2 that works fine and thank you for your work Eric and everyone who is working on this project!
Just tried the latest 1.7.0 firmware on my TP-Link 1043ND v2.1 and on my 240/20 internet connection I can't reach higher download speed than 120 Mbit/s. When I reset the router in the first seconds after reconnect I can download with 240, but then it goes back to 120 (i think when the services started succesfully). Flashed from stock firmware, tried default settings.
So I'm currently back to 1.6.2 that works fine and thank you for your work Eric and everyone who is working on this project!
Re: Version 1.7.0 - Barrier Breaker
UPC?Shady313 wrote:Hi!
Just tried the latest 1.7.0 firmware on my TP-Link 1043ND v2.1 and on my 240/20 internet connection I can't reach higher download speed than 120 Mbit/s. When I reset the router in the first seconds after reconnect I can download with 240, but then it goes back to 120 (i think when the services started succesfully). Flashed from stock firmware, tried default settings.
So I'm currently back to 1.6.2 that works fine and thank you for your work Eric and everyone who is working on this project!
![Smile :)](./images/smilies/icon_e_smile.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
>>>>> Doky <<<<<
Router: TP-Link TL-WR1043ND v2.1 (Gargoyle 1.9)
NAS server: Zyxel NSA-310 (Western Digital Red 1TB)
Router: TP-Link TL-WR1043ND v2.1 (Gargoyle 1.9)
NAS server: Zyxel NSA-310 (Western Digital Red 1TB)
Re: Version 1.7.0 - Barrier Breaker
ExactlyDoky wrote:UPC?You from hungary?
![Smile :)](./images/smilies/icon_e_smile.gif)
I see you too. What are your experiences with 1.7 and what is your internet speed?
(I see you have a Dell 15R notebook, well i have a 5537 notebook too
![Smile :)](./images/smilies/icon_e_smile.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
-
- Posts: 4
- Joined: Sat Jan 31, 2015 4:38 am
- Location: California USA
Re: Version 1.7.0 - Barrier Breaker
Netgear WNDR3700: Version 4
Version: 1.7.0
Bug: Rebooting the router breaks the internet
Fix: Power cycle the modem
No previous release.
Version: 1.7.0
Bug: Rebooting the router breaks the internet
Fix: Power cycle the modem
No previous release.
Netgear WNDR3700: Version 4
Gargoyle Version: 1.9.X build Dec 25-2015
Gargoyle Version: 1.9.X build Dec 25-2015