How too install and use DNSCrypt with Gargoyle
Moderator: Moderators
Re: How too install and use DNSCrypt with Gargoyle
For adventurers:
I installed dnscrypt v2. Use a external usb.
https://github.com/jedisct1/dnscrypt-pr ... on-OpenWRT
I get a loop. dnsmasq send to dnscrypt who send to dnsmasq...
Will search for help on openwrt forum.
I installed dnscrypt v2. Use a external usb.
https://github.com/jedisct1/dnscrypt-pr ... on-OpenWRT
I get a loop. dnsmasq send to dnscrypt who send to dnsmasq...
Will search for help on openwrt forum.
Re: How too install and use DNSCrypt with Gargoyle
It works for me. You will have a problem with RAM or storage (the program still downloads data from the net). Try to perform the extroot and convert the entire root to an external repository. Also see if you have enough RAM (enter free with ssh).
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: How too install and use DNSCrypt with Gargoyle
I see on my attempts, got a nice amount of resources (processor and RAM).
In the loop dnssec send to dnscrypt and crypt back to dnssec until tcp and udp limit.
If want see:
https://pastebin.com/ksEWNfKd
The router survive with free RAM (40%), disk space i dont remember.
I will try extroot, to do a new-and-totally clean attempt (all default).
Let´s see.
In the loop dnssec send to dnscrypt and crypt back to dnssec until tcp and udp limit.
If want see:
https://pastebin.com/ksEWNfKd
The router survive with free RAM (40%), disk space i dont remember.
I will try extroot, to do a new-and-totally clean attempt (all default).
Let´s see.
Re: How too install and use DNSCrypt with Gargoyle
This line is suspicious to me:
This is a line from the dnscrypt-proxy.toml file:
Did you change the IP and port in the dnscrypt-proxy.toml file?
Code: Select all
tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 5980/dnscrypt-proxy
Code: Select all
listen_addresses = ['127.0.0.1:5300']
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: How too install and use DNSCrypt with Gargoyle
Yeap. I changed to 127.0.0.53:53.
Will try roll back to 127.0.0.1:5300
Thanks!
Will try roll back to 127.0.0.1:5300
Thanks!
Re: How too install and use DNSCrypt with Gargoyle
Reflash the router, all default. Clean installation, no qos, nothing customized.
1.11.X (Built 20190426-2024 git@ddc7c0ba)
Using 127.0.0.1.
Same loop. I will give a time on this.
Must have other factor who i cant see.
Dnscrypt V1 works nice!
Many Thanks!
1.11.X (Built 20190426-2024 git@ddc7c0ba)
Using 127.0.0.1.
Same loop. I will give a time on this.
Must have other factor who i cant see.
Dnscrypt V1 works nice!
Many Thanks!
Re: How too install and use DNSCrypt with Gargoyle
How do I make it work? leave the steps please
Re: How too install and use DNSCrypt with Gargoyle
Did you read the first post..?
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: How too install and use DNSCrypt with Gargoyle
Yeah I can't make it work
it says to use this src / gz exopenwrthttp: //exopenwrt.and.in.net/attitude_ad ... x / packages but it doesn't install the opkg it can't find...
it says to use this src / gz exopenwrthttp: //exopenwrt.and.in.net/attitude_ad ... x / packages but it doesn't install the opkg it can't find...