Gargoyle Forum

I have been trying to get this configuration to work for a 2 days and can't seem to quite get a breakthrough. Here is my setup:

Internet via Verizon Jetpack 890L (192.168.1.1) DHCP on. Nat Off

Cradelpoint MBR95 Router connected to Jetpack using WiFi as wan (192.168.0.1) DHCP on .50-.99. Nat is off.

TL-WR1043N/ND v2 router connected via Wan port to the Lan port on MBR 95 (192.168.2.1) This has the 1.6.1 v2 firmware. DHCP on.

I can access the admin without issue but cannot seem to access the internet while connected to the TP-Link Router (via Wifi or Cable). Access to Internet via direct wireless connection to jetpack works fine.

Gargoyle Status:

Status
Device Name:Gargoyle
Gargoyle Version:1.6.1
Model:TP-Link TL-WR1043N/ND v2
Device Configuration:Gateway
Memory Usage:16.4MB / 60.2MB (27.2%)
Connections:258/4096
CPU Load Averages:0.03 / 0.09 / 0.13 (1/5/15 minutes)
Uptime:0 days, 3 hours, 4 minutes
Current Date & Time:08/10/14 7:37 PM CDT
WAN IP Address:192.168.1.3
WAN Netmask:255.255.255.0
WAN MAC Address:E8:94:F6:F9:DB:77
WAN Gateway IP:192.168.1.1
WAN DNS Server(s):-
LAN IP Address:192.168.0.3
LAN Netmask:255.255.255.0
LAN MAC Address:E8:94:F6:F9:DB:76
Wireless Mode:Access Point (AP)
Wireless MAC Address:E8:94:F6:F9:DB:75
Access Point SSID:KnechtGG
QoS Upload:Disabled
QoS Download:Disabled

I cannot ping any external address via name or IP. What am I missing? I'm sure I'm missing something and hope you guys can lead me in the right direction!

Thank you in advance.

Try enable NAT for all your routers. That seems to be the problem.