Help with Jet Pack & 2 Routers

[jkfromk]

I have been trying to get this configuration to work for a 2 days and can't seem to quite get a breakthrough. Here is my setup:

Internet via Verizon Jetpack 890L (192.168.1.1) DHCP on. Nat Off

Cradelpoint MBR95 Router connected to Jetpack using WiFi as wan (192.168.0.1) DHCP on .50-.99. Nat is off.

TL-WR1043N/ND v2 router connected via Wan port to the Lan port on MBR 95 (192.168.2.1) This has the 1.6.1 v2 firmware. DHCP on.

I can access the admin without issue but cannot seem to access the internet while connected to the TP-Link Router (via Wifi or Cable). Access to Internet via direct wireless connection to jetpack works fine.

Gargoyle Status:

Status
Device Name:Gargoyle
Gargoyle Version:1.6.1
Model:TP-Link TL-WR1043N/ND v2
Device Configuration:Gateway
Memory Usage:16.4MB / 60.2MB (27.2%)
Connections:258/4096
CPU Load Averages:0.03 / 0.09 / 0.13 (1/5/15 minutes)
Uptime:0 days, 3 hours, 4 minutes
Current Date & Time:08/10/14 7:37 PM CDT
WAN IP Address:192.168.1.3
WAN Netmask:255.255.255.0
WAN MAC Address:E8:94:F6:F9:DB:77
WAN Gateway IP:192.168.1.1
WAN DNS Server(s):-
LAN IP Address:192.168.0.3
LAN Netmask:255.255.255.0
LAN MAC Address:E8:94:F6:F9:DB:76
Wireless Mode:Access Point (AP)
Wireless MAC Address:E8:94:F6:F9:DB:75
Access Point SSID:KnechtGG
QoS Upload:Disabled
QoS Download:Disabled

I cannot ping any external address via name or IP. What am I missing? I'm sure I'm missing something and hope you guys can lead me in the right direction!

Thank you in advance.

[ericwong]

Try enable NAT for all your routers. That seems to be the problem.