I am running 1.5.11 on
TP-Link TL-WDR4300 v1
with a special config to use WAN Port as LAN
is it possible to update to 1.6.1 without any risk of loosing my config or briking the router?
Update TL-WDR4300 1.5.11 - 1.6.1
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Update TL-WDR4300 1.5.11 - 1.6.1
Very unlikely that you will brick your router unless by some
extremely unlucky chance that your power went out during flashing.
It is always a possibility that the upgrade could glitch and the
config gets corrupted so you have to reset the router and
reflash / reconfigure fresh.
No guarantees on flashing 3rd party firmwares
extremely unlucky chance that your power went out during flashing.
It is always a possibility that the upgrade could glitch and the
config gets corrupted so you have to reset the router and
reflash / reconfigure fresh.
No guarantees on flashing 3rd party firmwares
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400