Hi Guys
I have successfully flashed the Gargoyle firmware 1.6. Router connects me to the internet ok and all devices have access.. so whats the problem? If I change the LAN/WAN/AP settings I get Error on Page, no settings changed.....
Ok I have looked a little further;
The WLAN LED is not on, so I guess it is disabled
Cannot change time settings
Cannot correct time zone
Can anyone help???
Saving Settings TL-WR1043ND
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Saving Settings TL-WR1043ND
What router are you using?
What firmware did you flash from? Stock firmware?
Sometimes you have to reset to defaults and reflash Gargoyle.
What firmware did you flash from? Stock firmware?
Sometimes you have to reset to defaults and reflash Gargoyle.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400