Can't connect to router anymore (TP-Link WDR3600)

[whizz]

So I got this router with a fresh install of Gargoyle (1.6). Logged in successfully, changed password and all was good.

However I then changed the router IP from 192.168.1.1 to 192.168.0.1 and it just kept hanging there. Now I can't connect to either of the IPs.

I'm on Win7. Tried to telnet into each IP to no avail. When I pinged the router it responded only on 192.168.1.1:

Pinging 192.168.1.1 with 32 bytes of data;
Reply from 192.168.1.70: Destination host unreachable.
Reply from 192.168.1.70: Destination host unreachable.
Reply from 192.168.1.70: Destination host unreachable.
Reply from 192.168.1.70: Destination host unreachable.

Ping statistics for 192.168.1.1
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss)

I tried resetting with a short holding of the button and by holding it for 30+ seconds.

Any ideas what I could do to get it back working?

Cheers

[whizz]

I have done several more resets and switched it on and off again. Nothing.

Pinging still results in 192.168.0.1 getting a "request timed out" and 192.168.1.1 "unreachable".

[Lessram]

Tried ipconfig ?
There you should see Default Gateway IP
try that IP

[whizz]

Yeah, that showed me 192.168.0.1 as result. But you got me an idea and that was to check my IP settings. I still had it set to a static one with the gateway of my other network ... rookie mistake!!!

Thanks

[danymarc]

rookie mistake!!!)

Failsafe http://wiki.openwrt.org/doc/howto/generic.failsafe once in Failsafe
mount_root
firstboot
/rom/sbin/reboot