On a working DIR 615 E3 (same as E4 w/ non-removable Ant.)
Sysupgrade to 1.5.11 via the webinterface.
After hooking up the serial console :
jffs2: Too few erase blocks
Used failsafe :
cd /tmp
wget ftp://192.168.1.2/gargoyle_1.5.10-ar71x ... pgrade.bin
sysupgrade gargoyle_1.5.10-ar71xx-generic-dir-615-e4-squashfs-sysupgrade.bin
Result :
Working Again @ 1.5.10
BRICKED DIR 615 E4 @ 1.5.11
Moderator: Moderators
-
- Posts: 1
- Joined: Wed Jul 09, 2014 5:31 pm
Re: BRICKED DIR 615 E4 @ 1.5.11
hi
i bricked my dir 615 e4 router
now the status is constant orange light(power led)
i can enter the failsafe mode
which means when i press reset button while switching on the router
the power led blinks
and the lan port is enabled green
in this mode
i used static ip
some times im getting pings
but no web interface
tried putty(ssh) no use
plz help me
thanks
i bricked my dir 615 e4 router
now the status is constant orange light(power led)
i can enter the failsafe mode
which means when i press reset button while switching on the router
the power led blinks
and the lan port is enabled green
in this mode
i used static ip
some times im getting pings
but no web interface
tried putty(ssh) no use
plz help me
thanks
Re: BRICKED DIR 615 E4 @ 1.5.11
fasilsafe uses telnet, not ssh.
Eric Wong
PM me if you need to buy Gargoyle router in Australia/NZ, willing to pay me to help you on your Gargoyle configurations or build custom configured ROM with pre-installed app or try to fix your bricked router. Yes, I am looking for job/work.
PM me if you need to buy Gargoyle router in Australia/NZ, willing to pay me to help you on your Gargoyle configurations or build custom configured ROM with pre-installed app or try to fix your bricked router. Yes, I am looking for job/work.