Hey there,
Recently I've been playing around with different custom firmwares. I have successfully flashed to the latest gargoyle firmware for my model. My question is, how am I to revert to stock with this model? I know that the main TP-Link router on the install page has a file just for it to be used on the gargoyle update GUI. Is there any such file or method for the WDR3600?
Thanks
TP-Link WDR3600 back to stock
Moderator: Moderators
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: TP-Link WDR3600 back to stock
http://wiki.openwrt.org/toh/tp-link/tl- ... rie.u-boot
Read that part of the wiki
Some of it is in French but you should be able to use a
translating engine on the web
Looks like you have to recover via serial recovery / u-boot
Read that part of the wiki
Some of it is in French but you should be able to use a
translating engine on the web
Looks like you have to recover via serial recovery / u-boot
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
slapshot30
- Posts: 6
- Joined: Thu Nov 21, 2013 6:08 pm
Re: TP-Link WDR3600 back to stock
Thanks, I'll hold on to that for future reference.