CANNOT FIND MY HARDWARE

[niftywiz]

i have router Binatone WR1500N which firmware is showing.... Device Name:SpeediFi Gargoyle Version:1.5.X (Built 20130502-1733 git@505e8dc) Model:P-8120 .
I just want to upgrade the firmware.please help me to findout the correct firmware for my device.

[BashfulBladder]

As your router is not in the OpenWrt database, the manufacturer of your router is in the best position to answer your questions. If the router is unknown to OpenWrt, an image cannot be built for your router.

[niftywiz]

This is the photo of the pcb of my router.

[pbix]

If you SSH into your router and run 'dmesg" and post the output it may be possible to see what firmware they have on there.

Also what does the Gargoyle status->overview screen say? Post that.

[na5m]

I feel for ya, sir. Simply looking at and being able to read the labels on the ICs of your wireless router's PCB just isn't enough. And to inject an alien firmware into your router is not a trivial task. I've been trying to do so for a number of hours now. I bought a stock Buffalo wireless router from Amazon and quickly installed a DD-WRT firmware. The install was easy enough.But now I can't seem to install any other firmware.

The dd-wrt firmware is still "firmly" ensconsed in my hardware.

[niftywiz]

If you SSH into your router and run 'dmesg" and post the output it may be possible to see what firmware they have on there.

Also what does the Gargoyle status->overview screen say? Post that.

Here is a SSH Report.
login as: root
root@192.168.1.1's password:


BusyBox v1.19.4 (2013-03-01 19:07:00 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

------------------------------------------------------------------
| _____ _ |
| | __ \ | | |
| | | \/ __ _ _ __ __ _ ___ _ _| | ___ |
| | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ |
| | |_\ \ (_| | | | (_| | (_) | |_| | | __/ |
| \____/\__,_|_| \__, |\___/ \__, |_|\___| |
| __/ | __/ | |
| |___/ |___/ |
| |
|----------------------------------------------------------------|
| Gargoyle version 1.5.X | OpenWrt Attitude Adjustment branch |
| Gargoyle revision 505e8dc | OpenWrt revision r33444 |
| Built May 02, 2013 | Target ar71xx/custom |
------------------------------------------------------------------
root@SpeediFi:~# dmesg
[ 0.000000] Linux version 3.3.8 (arajput@localhost.localdomain) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #35 Thu May 2 23:08:12 IST 2013
[ 0.000000] MyLoader: sysp=ffffffff, boardp=ffffffff, parts=f0f0f0f0
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR7240 rev 2
[ 0.000000] Clocks: CPU:350.000MHz, DDR:350.000MHz, AHB:175.000MHz, Ref:5.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802daf90, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-WR741ND console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 29208k/32768k available (2131k kernel code, 3560k reserved, 409k data, 208k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 232.24 BogoMIPS (lpj=1161216)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] gpiochip_add: registered GPIOs 0 to 17 on device: ath79
[ 0.100000] MIPS: machine is TP-LINK TL-WR741ND
[ 0.500000] registering PCI controller with io_map_base unset
[ 0.520000] bio: create slab <bio-0> at 0
[ 0.520000] PCI host bridge to bus 0000:00
[ 0.530000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.530000] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.540000] pci 0000:00:00.0: [168c:002b] type 0 class 0x000280
[ 0.540000] pci 0000:00:00.0: fixup device configuration
[ 0.540000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
[ 0.540000] pci 0000:00:00.0: supports D1
[ 0.540000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.540000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[ 0.550000] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.550000] Switching to clocksource MIPS
[ 0.560000] NET: Registered protocol family 2
[ 0.560000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.570000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.580000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.580000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.590000] TCP reno registered
[ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.610000] NET: Registered protocol family 1
[ 0.610000] PCI: CLS 0 bytes, default 32
[ 0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.640000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.650000] msgmni has been set to 57
[ 0.650000] io scheduler noop registered
[ 0.660000] io scheduler deadline registered (default)
[ 0.660000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.690000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 0.700000] console [ttyS0] enabled, bootconsole disabled
[ 0.710000] m25p80 spi0.0: found s25sl032a, expected m25p80
[ 0.720000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
[ 0.720000] 5 tp-link partitions found on MTD device spi0.0
[ 0.730000] Creating 5 MTD partitions on "spi0.0":
[ 0.730000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.740000] 0x000000020000-0x000000104a00 : "kernel"
[ 0.740000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.760000] 0x000000104a00-0x0000003f0000 : "rootfs"
[ 0.760000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.780000] mtd: partition "rootfs" set to be root filesystem
[ 0.780000] mtd: partition "rootfs_data" created automatically, ofs=350000, len=A0000
[ 0.790000] 0x000000350000-0x0000003f0000 : "rootfs_data"
[ 0.800000] 0x0000003f0000-0x000000400000 : "art"
[ 0.810000] 0x000000020000-0x0000003f0000 : "firmware"
[ 0.920000] ag71xx_mdio: probed
[ 0.930000] eth0: Atheros AG71xx at 0xba000000, irq 5
[ 1.480000] eth0: Found an AR7240/AR9330 built-in switch
[ 2.520000] eth1: Atheros AG71xx at 0xb9000000, irq 4
[ 3.090000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[ 3.100000] TCP cubic registered
[ 3.100000] NET: Registered protocol family 17
[ 3.100000] Bridge firewalling registered
[ 3.110000] Ebtables v2.0 registered
[ 3.110000] 8021q: 802.1Q VLAN Support v1.8
[ 3.120000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 3.130000] Freeing unused kernel memory: 208k freed
[ 6.580000] Registered led device: tp-link:green:lan1
[ 6.580000] Registered led device: tp-link:green:lan2
[ 6.580000] Registered led device: tp-link:green:lan3
[ 6.590000] Registered led device: tp-link:green:lan4
[ 6.590000] Registered led device: tp-link:green:qss
[ 6.590000] Registered led device: tp-link:green:system
[ 6.590000] Registered led device: tp-link:green:wan
[ 7.040000] eth0: link up (1000Mbps/Full duplex)
[ 9.970000] JFFS2 notice: (420) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 169 of xref (0 dead, 156 orphan) found.
[ 10.210000] eth0: link down
[ 11.200000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 11.210000] Backport based on wireless-testing.git master-2012-09-07
[ 11.210000] compat.git: wireless-testing.git
[ 11.250000] cfg80211: Calling CRDA to update world regulatory domain
[ 11.260000] cfg80211: World regulatory domain updated:
[ 11.270000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.270000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.280000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.290000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.300000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.290000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 12.300000] ath: EEPROM regdomain: 0x0
[ 12.300000] ath: EEPROM indicates default country code should be used
[ 12.300000] ath: doing EEPROM country->regdmn map search
[ 12.300000] ath: country maps to regdmn code: 0x3a
[ 12.300000] ath: Country alpha2 being used: US
[ 12.300000] ath: Regpair used: 0x3a
[ 12.310000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.310000] Registered led device: ath9k-phy0
[ 12.310000] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xb0000000, irq=40
[ 12.320000] cfg80211: Calling CRDA for country: US
[ 12.320000] cfg80211: Regulatory domain changed to country: US
[ 12.330000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.340000] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 12.350000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 12.350000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.360000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.370000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.380000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 12.660000] PPP generic driver version 2.4.2
[ 12.700000] tun: Universal TUN/TAP device driver, 1.6
[ 12.710000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 12.810000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.990000] NET: Registered protocol family 24
[ 13.010000] nf_conntrack version 0.5.0 (459 buckets, 1836 max)
[ 13.570000] xt_time: kernel timezone is -0000
[ 13.910000] Hooked IMQ after mangle on PREROUTING
[ 13.910000] Hooked IMQ after nat on POSTROUTING
[ 13.920000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
[ 14.160000] Netfilter messages via NETLINK v0.30.
[ 14.220000] ip_set: protocol 6
[ 19.930000] device eth0 entered promiscuous mode
[ 20.530000] eth0: link up (1000Mbps/Full duplex)
[ 20.530000] br-lan: port 1(eth0) entered forwarding state
[ 20.540000] br-lan: port 1(eth0) entered forwarding state
[ 22.540000] br-lan: port 1(eth0) entered forwarding state
root@SpeediFi:~#

[niftywiz]

Please help me to find the firmware file for me.

[ispyisail]

Kernel command line: board=TL-WR741ND console=ttyS0,115200

TL-WR741ND

http://wiki.openwrt.org/toh/tp-link/tl-wr741nd

version 1, 2, 3, or 4?

[ispyisail]

vesion 4 = AR9331 SoC
yours = SoC: Atheros AR7240 rev 2

try

Code: Select all

/proc/cpuinfo

[niftywiz]

i cannot understand.please help me.