Gargoyle Forum

Hey,

I'm using_

Gargoyle version 1.5.9 | OpenWrt Attitude Adjustment branch |
| Gargoyle revision f73df29 | OpenWrt revision r34879 |
| Built January 03, 2013 | Target ar71xx/usb_large

Now my wifi and LAN are dying after a short period of time working.

After a /etc/init.d/network restart, Lan works for 1 minute and Wifi stays off.

If I do a "wifi", the Wlan gets up and works.

Lan stays dead.

What can I do?

After network restart,

I was checking dmesg but when LAN dies, there is no change in dmesg

EDIT: I can still use WOL but when the computer turns on, I don't have LAN.

What router are you using?

Try and upgrade to 1.5.10 - DO NOT keep settings

Fresh configure the router with 1.5.10 and see how it performs.

I'm using TP Link 1043

The system was working, only had problems with OpenVPN while trying to access shared folders in a LAN computer from a openvpn client.

Unfortunately, the router is far away and I can't re-flash it or I'll lose all the remaining connections.

The stange is that I can wake on lan to the same computer that lose the LAN ip after 1m (+/-) after doing a network restart

Any thing that I can get (logs or sort) in order to understand where is the problem?

I have a similar issue. Affter 5 stable days router lock's itself and kicks all users. So i can't access router via web gui and no client can't connect on it.

Using PPPoE
AP
20 MHz
Channel 1 (only stable)
N+G+B
PSK 2