When reverting back, can I do it directly from Webinterface (firmware upgrade) or is there a special procedure that should be followed? On wr740n page I only find information about debricking, but no flashing back to stock firmware.
Anyone succeeded in reverting back to stock firmware? I need to know this before installing gargoyle (I don't know why, but dd-wrt caused me a lot of problems. Luckily, I could revert the operation.
Thanks
*Also, TP-Link firmware has the option to restrict who can access Web interface to maximum 4 MACs. So the only way to access it would be through my computer. Does gargoyle has such an option?
TP-Link WR740N v4.23
Moderator: Moderators
TP-Link WR740N v4.23
Last edited by ATMXTN on Wed May 15, 2013 5:42 pm, edited 1 time in total.
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: TP-Link WR740N v4.23
http://wiki.openwrt.org/toh/tp-link/tl-wr741nd
Follow info for the WR741ND
The WR740N just has non-removable antenna
Follow info for the WR741ND
The WR740N just has non-removable antenna
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: TP-Link WR740N v4.23
Thank you. I shall follow that procedure.
*Also, TP-Link firmware has the option to restrict who can access Web interface to maximum 4 MACs. So the only way to access it would be through my computer. Does gargoyle have such an option?
*Also, TP-Link firmware has the option to restrict who can access Web interface to maximum 4 MACs. So the only way to access it would be through my computer. Does gargoyle have such an option?