Gargoyle Forum

I'm having problems getting the PPPoE on my gargoyle router to work, the router is “tl-wr1043nd” using 1.4.7 Gargoyle Firmware.

The TL-WR1043ND wan port is connected to iiNets Bobs lan1 port bob is set to bridge mode I’m able to connect my computer to bobs lan port and make a PPP connecting in windows and the internet works but when I try to connect the Gargoyle router using the PPPoE it will not work.

I don’t know if a setting is Bob is stopping gargoyle PPPoE working or if I have done something wrong in gargoyle?

There are no known issues with PPPoE communications in Gargoyle.

The only things that I can think of that would prevent connection would be a bad username or password entered into the web page. Other things would be hardware such as a bad cable or connector on your router.

You might post your screen shots and then from the command prompt of your router type "logread" and post the results. Sometimes messages there will give a hint.

sorry for delay in getting back to you but had to work out the "logread" thing and to have the free time to get at the routers

logread stuff below

Jan 1 00:00:10 Gargoyle user.info kernel: eth0: link up (1000Mbps/Full duplex)
Jan 1 00:00:11 Gargoyle user.info sysinit: Error 1 looking up hostname 0.pool.n tp.org
Jan 1 00:00:11 Gargoyle user.info sysinit: Error 1 looking up hostname 1.pool.n tp.org
Jan 1 00:00:11 Gargoyle user.info sysinit: Error 1 looking up hostname 2.pool.n tp.org
Jan 1 00:00:11 Gargoyle user.info kernel: device eth0.1 entered promiscuous mod e
Jan 1 00:00:11 Gargoyle user.info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:11 Gargoyle user.info kernel: br-lan: port 1(eth0.1) entering forwa rding state
Jan 1 00:00:12 Gargoyle user.info kernel: Compat-wireless backport release: com pat-wireless-2011-11-29
Jan 1 00:00:12 Gargoyle user.info kernel: Backport based on wireless-testing.gi t master-2011-12-01
Jan 1 00:00:13 Gargoyle user.info kernel: cfg80211: Calling CRDA to update worl d regulatory domain
Jan 1 00:00:13 Gargoyle user.info kernel: PPP generic driver version 2.4.2
Jan 1 00:00:13 Gargoyle user.info kernel: NET: Registered protocol family 24
Jan 1 00:00:14 Gargoyle daemon.info pppd[507]: Plugin rp-pppoe.so loaded.
Jan 1 00:00:14 Gargoyle daemon.notice pppd[507]: pppd 2.4.4 started by root, ui d 0
Jan 1 00:00:14 Gargoyle user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:15 Gargoyle user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Jan 1 00:00:15 Gargoyle user.info kernel: usbcore: registered new interface dri ver usbfs
Jan 1 00:00:15 Gargoyle user.info kernel: usbcore: registered new interface dri ver hub
Jan 1 00:00:15 Gargoyle user.info kernel: usbcore: registered new device driver usb
Jan 1 00:00:17 Gargoyle user.info kernel: cfg80211: World regulatory domain upd ated:
Jan 1 00:00:17 Gargoyle user.info kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 00:00:17 Gargoyle user.info kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:17 Gargoyle user.info kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:17 Gargoyle user.info kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:17 Gargoyle user.info kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:17 Gargoyle user.info kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:18 Gargoyle user.debug kernel: ath: EEPROM regdomain: 0x0
Jan 1 00:00:18 Gargoyle user.debug kernel: ath: EEPROM indicates default countr y code should be used
Jan 1 00:00:18 Gargoyle user.debug kernel: ath: doing EEPROM country->regdmn ma p search
Jan 1 00:00:18 Gargoyle user.debug kernel: ath: country maps to regdmn code: 0x 3a
Jan 1 00:00:18 Gargoyle user.debug kernel: ath: Country alpha2 being used: US
Jan 1 00:00:18 Gargoyle user.debug kernel: ath: Regpair used: 0x3a
Jan 1 00:00:18 Gargoyle user.debug kernel: ieee80211 phy0: Selected rate contro l algorithm 'minstrel_ht'
Jan 1 00:00:18 Gargoyle user.info kernel: ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Jan 1 00:00:18 Gargoyle user.info kernel: cfg80211: Calling CRDA for country: U S
Jan 1 00:00:19 Gargoyle user.info kernel: RPC: Registered udp transport module.
Jan 1 00:00:19 Gargoyle user.info kernel: RPC: Registered tcp transport module.
Jan 1 00:00:19 Gargoyle user.info kernel: RPC: Registered tcp NFSv4.1 backchann el transport module.
Jan 1 00:00:21 Gargoyle user.info kernel: cfg80211: Regulatory domain changed t o country: US
Jan 1 00:00:21 Gargoyle user.info kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 00:00:21 Gargoyle user.info kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 1 00:00:21 Gargoyle user.info kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 1 00:00:21 Gargoyle user.info kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:21 Gargoyle user.info kernel: cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:21 Gargoyle user.info kernel: cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:21 Gargoyle user.info kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 1 00:00:21 Gargoyle user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 00:00:22 Gargoyle user.info kernel: ip_tables: (C) 2000-2006 Netfilter Co re Team
Jan 1 00:00:23 Gargoyle user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Con troller (EHCI) Driver
Jan 1 00:00:23 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: Atheros AR91 xx built-in EHCI controller
Jan 1 00:00:23 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
Jan 1 00:00:23 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: irq 3, io me m 0x1b000000
Jan 1 00:00:23 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: USB 2.0 star ted, EHCI 1.00
Jan 1 00:00:23 Gargoyle user.info kernel: usb usb1: configuration #1 chosen fro m 1 choice
Jan 1 00:00:23 Gargoyle user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 00:00:23 Gargoyle user.info kernel: hub 1-0:1.0: 1 port detected
Jan 1 00:00:23 Gargoyle user.warn kernel: nf_conntrack version 0.5.0 (460 bucke ts, 1840 max)
Jan 1 00:00:23 Gargoyle user.warn kernel: CONFIG_NF_CT_ACCT is deprecated and w ill be removed soon. Please use
Jan 1 00:00:23 Gargoyle user.warn kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Jan 1 00:00:23 Gargoyle user.warn kernel: sysctl net.netfilter.nf_conntrack_acc t=1 to enable it.
Jan 1 00:00:25 Gargoyle user.info kernel: xt_time: kernel timezone is -0000
Jan 1 00:00:26 Gargoyle user.info kernel: Hooked IMQ after mangle on PRERO UTING
Jan 1 00:00:26 Gargoyle user.info kernel: Hooked IMQ after nat on POSTROUT ING
Jan 1 00:00:26 Gargoyle user.info kernel: IMQ driver loaded successfully.
Jan 1 00:00:26 Gargoyle user.info kernel: Ebtables v2.0 registered
Jan 1 00:00:27 Gargoyle user.info kernel: ohci_hcd: USB 1.1 'Open' Host Control ler (OHCI) Driver
Jan 1 00:00:27 Gargoyle user.info kernel: Initializing USB Mass Storage driver. ..
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver usb-storage
Jan 1 00:00:27 Gargoyle user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-alauda
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-cypress
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-datafab
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-freecom
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-isd200
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-jumpshot
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-karma
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-sddr09
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-sddr55
Jan 1 00:00:27 Gargoyle user.info kernel: usbcore: registered new interface dri ver ums-usbat
Jan 1 00:00:27 Gargoyle user.info kernel: fuse init (API version 7.13)
Jan 1 00:00:29 Gargoyle daemon.warn pppd[507]: Timeout waiting for PADO packets
Jan 1 00:00:29 Gargoyle daemon.err pppd[507]: Unable to complete PPPoE Discover y
Jan 3 23:31:49 Gargoyle user.info sysinit: Error 1 looking up hostname 0.pool.n tp.org
Jan 3 23:31:49 Gargoyle user.info sysinit: Error 1 looking up hostname 1.pool.n tp.org
Jan 3 23:31:49 Gargoyle user.info sysinit: Error 1 looking up hostname 2.pool.n tp.org
Jan 3 23:31:49 Gargoyle user.info sysinit: Loading defaults
Jan 3 23:31:50 Gargoyle user.info sysinit: Loading synflood protection
Jan 3 23:31:50 Gargoyle user.info sysinit: Adding custom chains
Jan 3 23:31:50 Gargoyle user.info sysinit: Loading zones
Jan 3 23:31:51 Gargoyle user.info sysinit: Loading forwardings
Jan 3 23:31:51 Gargoyle user.info sysinit: Loading redirects
Jan 3 23:31:51 Gargoyle user.info sysinit: Loading rules
Jan 3 23:31:51 Gargoyle user.info sysinit: Loading includes
Jan 3 23:31:52 Gargoyle user.info sysinit: udhcpc (v1.15.3) started
Jan 3 23:31:52 Gargoyle user.info sysinit: Sending discover...
Jan 3 23:31:55 Gargoyle user.info sysinit: Sending discover...
Jan 3 23:31:58 Gargoyle user.info sysinit: Sending discover...
Jan 3 23:32:02 Gargoyle user.info sysinit: No lease, failing
Jan 3 23:32:02 Gargoyle user.info sysinit: Optimizing conntrack
Jan 3 23:32:02 Gargoyle user.info sysinit: Loading interfaces
Jan 3 23:32:02 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Jan 3 23:32:02 Gargoyle cron.err crond[1198]: crond (busybox 1.15.3) started, l og level 5
Jan 3 23:32:03 Gargoyle authpriv.info dropbear[1212]: Running in background
Jan 3 23:32:04 Gargoyle daemon.warn httpd_gargoyle[1229]: started as root witho ut requesting chroot(), warning only
Jan 3 23:32:04 Gargoyle daemon.notice httpd_gargoyle[1229]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Jan 3 23:32:05 Gargoyle user.notice dnsmasq: DNS rebinding protection is active , will discard upstream RFC1918 responses!
Jan 3 23:32:05 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan 3 23:32:09 Gargoyle daemon.info dnsmasq[1300]: started, version 2.55 caches ize 150
Jan 3 23:32:09 Gargoyle daemon.info dnsmasq[1300]: compile time options: IPv6 G NU-getopt no-DBus no-I18N DHCP TFTP
Jan 3 23:32:09 Gargoyle daemon.info dnsmasq-dhcp[1300]: DHCP, IP range 192.168. 1.100 -- 192.168.1.250, lease time 12h
Jan 3 23:32:09 Gargoyle daemon.info dnsmasq[1300]: using local addresses only f or domain lan
Jan 3 23:32:09 Gargoyle daemon.info dnsmasq[1300]: reading /tmp/resolv.conf.aut o
Jan 3 23:32:09 Gargoyle daemon.warn dnsmasq[1300]: ignoring nameserver 192.168. 1.1 - local interface
Jan 3 23:32:09 Gargoyle daemon.info dnsmasq[1300]: using local addresses only f or domain lan
Jan 3 23:32:09 Gargoyle daemon.info dnsmasq[1300]: read /etc/hosts - 2 addresse s
Jan 3 23:32:09 Gargoyle daemon.info dnsmasq-dhcp[1300]: read /etc/ethers - 0 ad dresses
Jan 3 23:32:09 Gargoyle daemon.warn exportfs[1316]: could not open /var/lib/nfs /.etab.lock for locking: errno 2 (No such file or directory)
Jan 3 23:32:09 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nf s/.etab.lock for locking: errno 2 (No such file or directory)
Jan 3 23:32:09 Gargoyle daemon.err exportfs[1316]: can't lock /var/lib/nfs/etab for writing
Jan 3 23:32:09 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/et ab for writing
Jan 3 23:32:10 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan 3 23:32:10 Gargoyle user.info sysinit: (Did you specify correct configurati on file path?)
Jan 3 23:32:10 Gargoyle user.debug kernel: ar71xx-wdt: enabling watchdog timer
Jan 3 23:32:23 Gargoyle daemon.info dnsmasq-dhcp[1300]: DHCPDISCOVER(br-lan) 19 2.168.1.151 00:1b:fc:3e:fd:35
Jan 3 23:32:23 Gargoyle daemon.info dnsmasq-dhcp[1300]: DHCPOFFER(br-lan) 192.1 68.1.151 00:1b:fc:3e:fd:35
Jan 3 23:32:23 Gargoyle daemon.info dnsmasq-dhcp[1300]: DHCPREQUEST(br-lan) 192 .168.1.151 00:1b:fc:3e:fd:35
Jan 3 23:32:23 Gargoyle daemon.info dnsmasq-dhcp[1300]: DHCPACK(br-lan) 192.168 .1.151 00:1b:fc:3e:fd:35 craig-xkqua0a2r
Jan 3 23:32:33 Gargoyle daemon.warn pppd[507]: Timeout waiting for PADO packets
Jan 3 23:32:33 Gargoyle daemon.err pppd[507]: Unable to complete PPPoE Discover y
Jan 3 23:32:42 Gargoyle authpriv.info dropbear[1411]: Child connection from 192 .168.1.151:1857
Jan 3 23:32:54 Gargoyle authpriv.notice dropbear[1411]: Password auth succeeded for 'root' from 192.168.1.151:1857

Here is the relevant error message.

mcEdie wrote: Jan 3 23:32:33 Gargoyle daemon.warn pppd[507]: Timeout waiting for PADO packets

Your modem is not communicating with your router. Since you say that it works with your PC you might try copying the MAC address of your PC into the "Use custom MAC address" field in the PPPoE section of your router. That should fool the modem into thinking it is talking to your PC.

If that does not work then further investigation on your part will be needed and/or a call to the tech support line of your ISP.

Should my modem be showing up in the connected hosts page?, a few time after a reset of the router I can see my modems IP on the connected hosts page for about 30 sec then its gone

http://www.gargoyle-router.com/phpbb/vi ... =11&t=3656

found this post today could I be getting the same kinda problem if so changing to 1.5.9 should fix it?

Will try the  "Use custom MAC address" in the morning before I think about changing firmware

I got my hands on an old dlink router as a test to wan not working on 1.4.7 firmware thing and the PPPoE worked on the first try with the dlink so looks like gargoyle was the problem so I will change it from 1.4.7 to the newest 1.5 update next time I free time.

Just double checking I only need to download the sysupgrade.bin when going from 1.4.7 to 1.5.9 the factory.bin is for when changing from the default firmware?

Tried going from 1.4.7 to 1.5.9 router no longer works at all I cant ping it, wireshark isn’t showing any packets from 192.168.1.1, the power led lights up sys led will not light up at all, lan leds will light up if plugged in that’s it