That' what I tried.
Wlan LED does not come up.
Can not access via telnet.
Flashing with Kamikaze from Ozel was successfull.
Need some hints.
Flash OM1P with 1.5.9
Moderator: Moderators
Re: Flash OM1P with 1.5.9
I now started with flashing the ozel files.
From there I managed to install Gargoyle.
I'm now on 1.2.0
From there I could upgrade with a sysupgrade file.
Where do I find sysugrade files?
From there I managed to install Gargoyle.
I'm now on 1.2.0
From there I could upgrade with a sysupgrade file.
Where do I find sysugrade files?
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Flash OM1P with 1.5.9
Latest version you should try on that is 1.2.5
gargoyle_1.2.5-atheros-combined.squashfs.img
(combined below files in 1 file)
gargoyle_1.2.5-atheros-root.squashfs
gargoyle_1.2.5-atheros-vmlinux.lzma
There is no sysupgrade file for these devices.
If your router only has 16MB of RAM, you should not flash anything
higher than 1.2.5 -- You really need a 32MB router for Gargoyle.
gargoyle_1.2.5-atheros-combined.squashfs.img
(combined below files in 1 file)
gargoyle_1.2.5-atheros-root.squashfs
gargoyle_1.2.5-atheros-vmlinux.lzma
There is no sysupgrade file for these devices.
If your router only has 16MB of RAM, you should not flash anything
higher than 1.2.5 -- You really need a 32MB router for Gargoyle.


2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400