Version 1.5.9 - Plugins Interface
Moderator: Moderators
Re: Version 1.5.9 - Plugins Interface
HI
WR-741ND V4 -Version 1.5.9 it seems its working fine
in client+ap
the default dbm is set in 27 dbm i need put more low??
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
WR-741ND V4 -Version 1.5.9 it seems its working fine
in client+ap
the default dbm is set in 27 dbm i need put more low??
TL-WR-741ND V4.20 -Version 1.9.X
TL-WA-701ND V1.2 - Version 1.9.X
TL-WA-701ND V2.1 - Version 1.9.X
TL-WR-741ND V4.22 X 3 -Version 1.9.X
TL-WR-841ND V8 -Version 1.9.X
TL-WA-901ND V3 - Version 1.9.X
TL-WA-701ND V1.2 - Version 1.9.X
TL-WA-701ND V2.1 - Version 1.9.X
TL-WR-741ND V4.22 X 3 -Version 1.9.X
TL-WR-841ND V8 -Version 1.9.X
TL-WA-901ND V3 - Version 1.9.X
Re: Version 1.5.9 - Plugins Interface
i have a v2.4 741ND too and it's working fine with 1.5.9 as a wireless repeater for months nowKrog wrote:HI![]()
WR-741ND V4 -Version 1.5.9 it seems its working fine
in client+ap
the default dbm is set in 27 dbm i need put more low??
27 dbm is the default value so leave it that way if you don't want smaller wifi coverage
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Version 1.5.9 - Plugins Interface
http://wireless.kernel.org/en/users/Documentation/iwKrog wrote:HI![]()
WR-741ND V4 -Version 1.5.9 it seems its working fine
in client+ap
the default dbm is set in 27 dbm i need put more low??
run the command
iw list
from the command line after you telnet/ssh into the router
Even though it shows 27dbm, the max output your router can
do is listed in that "iw list" command
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Version 1.5.9 - Plugins Interface
mine (v2.4 rev) says this:
Frequencies:
* 2412 MHz [1] (27.0 dBm)
* 2417 MHz [2] (27.0 dBm)
* 2422 MHz [3] (27.0 dBm)
* 2427 MHz [4] (27.0 dBm)
* 2432 MHz [5] (27.0 dBm)
* 2437 MHz [6] (27.0 dBm)
* 2442 MHz [7] (27.0 dBm)
* 2447 MHz [8] (27.0 dBm)
* 2452 MHz [9] (27.0 dBm)
* 2457 MHz [10] (27.0 dBm)
* 2462 MHz [11] (27.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)
Re: Version 1.5.9 - Plugins Interface
thanks DoesItMatter i gona to see who use tenel
trance89 who you make that to see the info?
well if is the same router i think is safe the 27dbm
trance89 who you make that to see the info?
well if is the same router i think is safe the 27dbm
TL-WR-741ND V4.20 -Version 1.9.X
TL-WA-701ND V1.2 - Version 1.9.X
TL-WA-701ND V2.1 - Version 1.9.X
TL-WR-741ND V4.22 X 3 -Version 1.9.X
TL-WR-841ND V8 -Version 1.9.X
TL-WA-901ND V3 - Version 1.9.X
TL-WA-701ND V1.2 - Version 1.9.X
TL-WA-701ND V2.1 - Version 1.9.X
TL-WR-741ND V4.22 X 3 -Version 1.9.X
TL-WR-841ND V8 -Version 1.9.X
TL-WA-901ND V3 - Version 1.9.X
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Version 1.5.9 - Plugins Interface
https://dev.openwrt.org/ticket/10034Krog wrote:thanks DoesItMatter i gona to see who use tenel
trance89 who you make that to see the info?
well if is the same router i think is safe the 27dbm
Read that ticket, all the way at the bottom
WR741ND has max output of 17dbm (+ 3dmb for default antenna)
Even though it may show 27dbm, the max it will output is 17dbm
because that is a limitation of the hardware.
IF you have a consumer router - it is highly unlikely it will go
over 20dbm = 100mw
There are some that will output 1/2watt = 27dbm - but those are rare
The more wattage you put out, the hotter the device will run
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Version 1.5.9 - Plugins Interface
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
i read it
thanks DoesItMatter for the info
100mw is ok the router reach is awesome
and is working smooth
TL-WR-741ND V4.20 -Version 1.9.X
TL-WA-701ND V1.2 - Version 1.9.X
TL-WA-701ND V2.1 - Version 1.9.X
TL-WR-741ND V4.22 X 3 -Version 1.9.X
TL-WR-841ND V8 -Version 1.9.X
TL-WA-901ND V3 - Version 1.9.X
TL-WA-701ND V1.2 - Version 1.9.X
TL-WA-701ND V2.1 - Version 1.9.X
TL-WR-741ND V4.22 X 3 -Version 1.9.X
TL-WR-841ND V8 -Version 1.9.X
TL-WA-901ND V3 - Version 1.9.X